Transfer
Results: 351
'lawry' Rotary Attachment For Paraplegics
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rotating transfer device to allow paraplegics to use the toilet then swing away from the toilet on the same seat to use the shower hose. Device made of a U shaped seat held horizontally with the help of an S shaped cantelever system fastened to the floor and using ball and taper bearings to let it rotate. This is used in conjunction with an overhead support which allows paraplegics or lower extremity amputees with upper body strength to toilet and show
3-Hole Offset Board (Model 31652)
The 3-Hole Offset Board, Model 31652, is a transfer board designed for use by people who use wheelchairs. Made of 7-ply Finnish birch plywood with a lacquer finish, the board features 3 hand holes set at an angle to assist the in gripping as the user moves across the board. DIMENSIONS (LxW): 24 x 11.5 inches. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase.
32 Inch Beasy Glider Transfer System
The 32 Inch Beasy Glider Transfer System is designed for use by individuals with mobility disabilities or spinal cord injury to use during transfers. Since there is no lifting involved, the risk of back and brachial plexus type injuries for the person being transferred are reduced and it eliminates back injuries for care givers with proper use. The Beasy Board by Beasy Trans provides users with a safe, comfortable and dignified way to transfer from bed to wheelchair, from wheelchair to commode o
Ableware 704010000 The Patient Handler
The Patient Handler is a handled sling that saves the attendants back and provides more comfort and safety for the patient. It can be used by one or two professionally trained people for reseating a patient, transferring between bed, commode, wheelchair etc. or standing a patient up from a seated position. The sling is made of high strength but flexible plastic that conforms to the patient's body.
Ableware 704021048 Gait Belt-Striped-48"
Gait Belt-Striped 48 inches is designed for to help health care providers and caregivers to move patients from one surface to another.
Ableware 704021054 Gait Belt-Striped-54"
Gait Belt-Striped-54 inches is designed to assist health care professionals and caregivers with transferring patients from one surface to another.
Ableware 704022000 Slip-On Gait Belt Handle With 2 Grips
The Ableware Slip-On Gait Belt Handle slides onto any gait belt 2 inches (5.08 cm) wide or less and provides caregivers with two strong, easy to grab vertical handles. Making use of both horizontal and vertical holding positions results in safer and easier transfers. Made of high strength webbing; it won't rip or tear. Belt not included.
Ableware 704030000 Patient Slide by Maddak
The Patient Slide makes the process of sliding a person to the back of a seat easier and safer for both the patient and the caregiver. The Patient Slide reduces the risk of bruising and injury caused by grabbing the individual or their clothing. Can be used on chairs, wheelchairs, and transport chairs. Smooth surface on one side reduces friction while the non-slip material on the other end allows the patient to be safely repositioned to the back of the seat. Soft, built-up handles are easy to ho
Ableware 704040000 X-Fer Rail Portable Transfer Rail
X-Fer Rail Portable Transfer Rail is designed for people who use a transfer board but do not travel with them due to their bulkiness and weight. The portable transfer board offers all of the functionality of a traditional transfer board but folds to a compact 16.25 inches (41.3 cm) when not in use. It folds and unfolds enabling safe transfers to and from a wheelchair, and fits in a backpack, wheelchair bag, carry-on or briefcase. Its portability promotes use outside of the home helping to redu
Ableware 704071500 15" Standing/Sitting Turntable by Maddak
Ableware's Standing-Sitting Turntable is a rotating pivot disk designed for people with limited mobility and other related disabilities. The flexible design allows the user to sit on the device and turn on a bed or chair. It is useful for getting in and out of a car seat. A rubber disk on the bottom provides a non-skid surface while the top plastic disk slides against a fabric center. The turning disk provides a smooth, controlled motion, to make the user feel secure.
Ableware 704170000 35" Mobility Leg Lift by Maddak
Ableware's Leg Lift is designed for people with limited lower extremity strength. It enables them to lift the foot onto a wheelchair foot rest, bed or into a car. The user can independently move their feet with the help of the leg strip.
Ableware 704180000 Leg Wrap Positioning Aid-Single
The Ableware Leg Wrap Positioning Aids attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Upper and lower handles eliminate the need to grab clothing and create a controlled movement thereby reducing injury caused by dropping the legs.
Ableware 704180002 Leg Wrap Positioning Aid
The Ableware Leg Wrap Positioning Aids attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Convenient upper and lower handles eliminate the need to grab clothing and create a controlled movement thereby reducing injury caused by dropping the legs.
Ableware 704200000 Leg Assist Mobility Device
Designed to make it easier for caregivers to reposition and transfer people recovering from total hip or knee surgery when it is necessary for the legs to be kept stable and moved in unison. Legs and hips are also positioned in-line to eliminate the risk of further injury. Made of soft, comfortable fabric with a built-up grip that can be adjusted to accommodate the user's preference. Machine washable.
Ableware Reversible Toilet Transfer Seat (Rtts)
The Ableware Reversible Toilet Transfer Seat (RTTS) is a toilet transfer aids designed for use by individuals with mobility disabilities. The unit can be used with the armrests up to assist those who have difficulty rising from the toilet, but do not require as much assistance as provided by an elevated toilet seat or grab bars. When used with the armrests turned toward the floor, this device becomes an extra-wide extended platform to assist in wheelchair transfers. This seat bolts to most stan
Adapted Grab Bar For An Armchair.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Grab bar to assist person in standing up from upholstered armchair. Two metal strips attach to side frame of armchair. Two steel pipes form the bar. One attaches vertically to the metal strips. The second, horizontal bar attaches to the vertical one. A specially fabricated joint allows the horizontal bar to pivot or to lock in position, providing a stable hand grip. Measurements determine the optimum distance from chair for vertical bar and the optimum
Adaptive Device For Polecat Transfer.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation of a Polecat to aid in wheelchair transfers for persons with some arm and leg muscle strength. Describes a turntable attachment made of two blocks of wood about 10 by 5 by 2 fastened together with a hinge on one side and a gate latch on the other; a semicircular platform with an 8 inch radius nailed to each block; and a hole drilled through platform and block to allow the device to be fastened around a Polecat. The patient places both feet o
Adaptor For Pool Lift
CUSTOM ADAPTATION PURPOSE: To enable an individual with spinal cord injury to transfer to a pool. An existing pool lift required an adaptor in order to use a spreader from an indoor lift. The spreader supports the transfer sling used to lower the individual into the pool. The adaptor was made from stainless steel wire and two thimbles purchased from a ship's chandlery. The wire was looped around the thimbles and long-handled tongs were used to crimp a metal loop around each pair of wires. TITL
Advantage-Rail System
The Advantage-Rail System is a standing transfer aid designed for use by individuals with mobility and balance disabilities. Intended for use beside the bed, toilet, or bathtub, the unit consists of a height-adjustable support rail with a padded horizontal handle and a floor plate. The rail fits in the low-profile floor plate with a push-down-and-turn motion, allowing the rail to be used in multiple locations. With a gentle lift, the handle pivots with the user to assist in taking small steps fo
Agilelife System
The AgileLife System is an automated, no-lift patient transfer and mobility system, helping people who are bedridden transfer in and out of bed safely and quickly. For caregivers, AgileLife automates patient transfer to and from a hospital bed into a wheelchair/commode docked at the foot of the bed. The core product is an integration of several assistive devices that address the challenges of safe patient handling. In both home and institutional settings, the AgileLife System aids in preventing
Alvema Pixi Stroller
The Alvema Pixi Stroller is a sturdy transfer device specifically designed for children with disabilities who lead active lifestyle. Pixi is outfitted with features such as a folding footrest, an adjustable-angle push-bar as well as a footbrake so both the user and operator of the stroller have complete control and comfort.
Angled Swivel Bar (Model 9029)
Angled swivel bar is inverted V shape to allow clearance of head. Straight swivel bar is needed for more seat clearance and all car transfers. CAPACITY: 400 pounds.
Anti-Slip Transfer Board With No Hand Holes
The Anti-Slip Transfer Board with No Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEIGHT: 2.5 p
Anti-Slip Transfer Board With Two Horizontal Hand Holes
The Anti-Slip Transfer Board with Two Horizontal Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24, or 29 x 8 inches.
Anti-Slip Transfer Board With Two Vertical Hand Holes
The Anti-Slip Transfer Board with Two Vertical Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEI
Arjo Dextra
Adjustable mechanical patient lift. Sling and frame design accommodates all types and sizes of people. C shaped base, 715 mm by 810 mm, for passing through narrow doorways and access to bulky wheelchairs. Contoured, reinforced slings with built in head support connect at four attachment points. Machine washable. Polyester. Tilting frame allows for upright or reclined positioning of person in sling. Wide lifting range allows lifting from floor up to high bed. Patient is transported at chair heigh
Arjo Lift Hygiene Chair, Arjo Lift Ride Chair, Arjo Lift Bath Trolley, & Arjo Therapy Trolley
Height adjustable battery powered patient lifts for single attendant transfers without lifting. U shaped base on casters. Lift stops automatically on contact with any obstruction. Height adjustment range to 23 1/2 inches. Lift ride chairs have range of 21 1/2 inches. 6 amp battery enclosed in plastic case. Low battery indicator light signals when 60% of capacity is used. Battery charger has circuitry for preventing overcharging. Maximum lift capacity 330 pounds. Lift Hygiene Chair has 2 part sea
Arjo Maxilift
Adjustable battery powered patient lift. Sling and frame design accommodates all types and sizes of people. Adjustable base for passing through narrow doorways and access to bulky wheelchairs. Contoured, reinforced slings with built in head support connect at four attachment points. Machine washable. Polyester. Tilting frame allows upright or reclined positioning in sling during transfer. Wide lifting range allows lifting from floor up to high bed. Remote control. 24V rechargeable battery with i
Arjo Pilot Lift Ride Chair
Person can be placed on seat while lying in bed, brought to sitting position and safety arm and backrest lowered around person. Some assistance from the person is needed. Lift is hydraulically adjustable, low base with casters. Seat can be lowered into elevating bathtub or used as commode seat for toilet. Bed pan holder attached. Stretcher can be attached to lift in place of seat.
Armrest To Assist With Standing
CUSTOM ADAPTATION PURPOSE: To enable an individual with arthritis to rise to a standing position from a seat without armrests. This device was designed to be portable for use with a variety of armless chairs and church pews. The frame with a U-shaped base was made of 20 millimeter steel tubing and steel tubing armrests were attached to the base. The front arms or prongs of the base have wide flat strips that provide a stable surface for the user as she pushes on the armrests to stand. A seat an
Assist-A-Tray
The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur
Assista-Rail
The Assista-Rail is a transfer aid for beds designed for use by individuals with balance or mobility disabilities. This inverted-U shaped rail slides between mattress and box spring and the required, included safety strap with side-release buckle and anti-slide grips prevents the rail from shifting during use. Made of heavy-gauge steel, the rail is equipped with a non-latex foam grip. DIMENSIONS: The unit extends 24 inches under the mattress and up from the mattress 16 inches. The rail extends a
Aust.rail.ia
---- PROTOTYPE --------- PURPOSE: To assist individuals with balance or mobility disabilities and generalized weakness stand and negotiate environmental barriers with a portable handrail. Aust.rail.ia is a portable all-purpose rail that can be used indoors or outdoors as a handrail, vehicle barrier, general purpose barrier or a “space-restoring” storage or shelving utility area. It can also be used as a sitting/standing aid. This portable rail requires mounting at one end, eliminating the ne
Auto-Zero Weight Module (Model Sr801)
The Auto-Zero Weight Module, model SR801, is a transfer lift scale attachment designed for use by individuals with mobility disabilities or spinal cord injury. This self-contained, portable weight module converts Hoyer lift models C-HLA, P-HLA, E-C-HLA, P-C-HLA, and C-HLA-RB, or Invacare lift models from the 9800 and 9900 Series into a digital scale system. The scale has a five-digit liquid crystal display (LCD) that shows weight in either pounds or kilograms. POWER: Uses one 9-volt battery. DIM
Barrier Free Lift Unilift Ceiling Lift
The Barrier Free Lift Unilift Ceiling Lift is an overhead transfer lift designed for use with individuals with mobility disabilities. Available with a ceiling-mounted track or free-standing frame, this unit permits a horizontal change of direction to be performed by hand or with a motor. The transverse track system uses two tracks: one track is installed the entire length of the room and the other is a perpendicular track installed the entire width of the room. The lift can move on either track
Bathmaster Sonaris
Bathmaster Sonaris is designed to assist users with limited mobility and balance as well as their caregivers during transfers in and out of the bathtub. The Bathmaster Sonaris is operated by a rechargeable battery and can perform an average of 18 lifts per charge. There is an audible beep and a blinking light to alert you when the battery needs to be recharged. The operator buttons on the hand controller are simple and large to make it easy for anyone to operate. The seat and back snap together
Bathroom Ceiling Lift
DO-IT-YOURSELF-ENTRY --- PURPOSE: To enable a person who uses a wheelchair to make transfers in the bathroom. A U-shaped channel runs through the ceiling and is supported by the rafters. Operated by a 440-pound hoist motor, the figure-eight-shaped system enables the user to go backward, forward, right, or left. The lift, equipped with a transfer lift sling, swivels to allow changes of direction. . MATERIALS: Channel, cables, controller, motor, and lift sling. TOOLS: Shop tools. SKILLS REQUIRED:
Beasy II Transfer System
The Beasy II Transfer System is designed for use by individuals with mobility disabilities or spinal cord injury to use during transfer. The transfer system is desinged for use in smaller areas, especially during bathroom transfers, or for boosting patients in bed. It may also be used for independent transfers with professional approval.
Beasyglyder 32
The BeasyGlyder is a transfer board system designed to assist individuals in transferring between a wheelchair and bed, shower bench, commode, car, chair, etc or between a stretcher and a bed. This device is crescent-shaped to fit around wheelchair arms and wheels. It features an elongated S-shaped groove in the center to serve as a track for a round seat that rotates up to 360 degrees and slides from one end of the track to the other. Because the seat slides with the user, the shear stress and
Beasytrans Easy Transfer System (Ets) & Beasy Ii Easy Transfer System (Ets)
The BeasyTrans ETS and Beasy II ETS are transfer board systems designed to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. These devices differ from other transfer devices in that they have sliding seats that move from one end of a central elongated S-shaped track to the other. Because the seats slide with the user, the shear stress and friction associated with moving is borne by the system, not the users' skin.
Bed Caddie
The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds.
Bed Cane
The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o
Bed To Commode Lift Increases Independence.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Device to assist someone with rheumatoid arthritis to transfer from bed to commode and back without using legs or requiring assistance from others. Materials include standard garage door opener, A-frame and sling for lift, 2 by 4 board, and lag screws. SKILLS REQUIRED: Woodworking. AUTHOR: Alexander, L TITLE: Bed to Commode Lift Increases Independence JOURNAL: Accent on Living REF: Vol 23 No 4, Spring 1979: p 108-109 PAGES (including cover): 3 1979.
Bedroom / Bathroom Swing Lift
The Bedroom/Bathroom Swing Lift is a powered transfer lift designed for use by individuals with mobility or lower extremity disabilities or spinal cord injury. When installed in a bedroom or bathroom, this lift enables the user to maneuver to a wheelchair, toilet, shower, or bed. It has a tri-directional swing arm, which the user can move up and down using a push-button controller. The arm swings from side to side in two places. This allows nearly full range of motion around the bedroom or bathr
Birillo Gait Trainer Walker Size 1
The Birillo Size 1 is a gait trainer / walker specifically designed to give a child with special needs the ability to move freely and safely around the home, school, daycare, and therapy environments.
Body Up Evolution
The Body UP Evolution is a transport chair, caster commode, shower chair and transfer lift sling designed for use by people with balance, lower extremity or mobility disabilities, or spinal cord injury. FRAME (HxLxW): 44 x 35 x 18 inches. This chair has a stainless steel frame with a hinged back so that a person can be loaded from the rear of the frame. The frame separates into two pieces for transport or storage. SEAT: Sling seat that can be raised or lowered. To facilitate loading, the seat ca
Bottoms Up Bar
The Bottoms Up Bar is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person in a wheelchair to transfer to a seated position on the ground or floor and from the floor or ground back into the wheelchair. The Bottoms Up Bar attaches to a wheelchair's frame with two collar clamps that are fastened to the front of the frame. The width of the Bottoms Up Bar is adjustable to accommodate multiple wheelcha
Buscot Babevac Cot
Buscot Babevac Cot is designed for use in the hospital environment for easy and safe evacuation of premature and new born babies in the event of fire or emergency. The Buscot Babevac Cot will carry up to three babies, depending on size and condition. Secure storage for small oxygen cylinder on the underside of the cot to allow manual ventilation of baby if required. (Cylinder not included). Adjustable shoulder straps enable the cot to be carried by one or two carriers. Flexible strong constructi
Canadian Padded Transfer Board
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded transfer board with a plinth which fits into the forward arm rest socket of a standard wheelchair. Transfer board made of 15 by 6 1/2 inch plywood, a base plate of iron or steel, an iron water pipe, a sheet (10 by 6 inches) of firm leather or plastic, foam padding and a slippery fabric cover. The board is used in place of either arm of the wheelchair. Includes instructions and diagrams. SKILLS REQUIRED: Woodworking. Upholstering. AUTHOR: Wightwi
Car Slide (Model 70406)
The Car Slide, model 70406, is a transfer aid designed for persons who have difficulty getting positioned on a car seat, chairs, or beds. The device consists of a waterproof denim top and a slippery vinyl bottom. Large hand loops are made of 1-inch webbing and located on each side of the rectangular mat. DIMENSIONS: 30 x 35.5 inches. WEIGHT: 1 pound 9 ounces.
Car Slide.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A fabric slide to be used to help position a person on a car seat. Slide made with about a yard of slippery material (nylon) sewn to a yard of nonslippery material (denim) with strong fabric or webbing sewn in three long ovals to make handles. The nylon side goes against the car seat for ease of sliding. Includes diagram and photograph. SKILLS REQUIRED: Sewing. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handicapped REF: Edmonton, Alberta, C
Care-Give-R-Lift Bed Sled
The Care-Give-R-Lift Bed Sled is a turning aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Designed for repositioning a person in a bed or recliner the device is made of cotton canvas with heavy nylon webbing handles across the width at two locations. A removable bed pad or terry cloth pad can also be placed on the device for comfort. The unit is hand- or machine-washable in warm water and should be air dried. DIMENSIONS(LxW): 40 x 30 in
Care-Give-R-Lift Skid Seat ( Perforated Suede Vinly)
The Care-Give-R-Lift Skid Seat (Perforated Suede Vinyl) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is designed for use with a gel cushion and is made of perforated suede vinyl backed with non-slip fabric. Perforations allow air circulation. The suede surface is soft to the to
Care-Give-R-Lift Skid Seat (Canvas) (Models A & B)
The Care-Give-R-Lift Skid Seat (Canvas) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is made of cotton canvas. A snap-close tether stap holds the seat on the chair while the individual is being seated. The device can be hand washed and air dried. Model A has full loop handles s
CareGuard Standard Sling without Commode Opening
The CareGuard Standard Sling without Commode Opening is a transfer sling designed for use by individuals with mobility and balance disabilities. The sling commode opening can be used on heavy or light patients. It can be used for weighing, transferring, or to simply reposition the patient. Polyester mesh fabric supports the patient from shoulders to the knees.
Carex Ultra Grip Pivot Suction Grab Bar
The Carex Ultra Grip Pivot Suction Grab Bar is designed to assist individuals in the tub, shower, and bathroom to prevent slips and falls, and offer support. These grab bars are available in straight lengths and 22 different custom designs. The unique pivoting center design allows for installation in whatever position it is needed and the handy visual indicators on the suction cups ensure you're grabbing onto a solid handle.
Handy and easy to use, this suction cup grab bar delivers ideal balance
Century's Lift Transfer System.
Patient lift with single belt lift mechanism, lifts and transfers persons in sitting position. Height 39 3/8 inches, width 21 5/8 inches, length 33 1/2 inches, weight 81 1/2 pounds. Lifting range 15 3/4 inches. Four 3 inch casters with locks. Optional model with expandable base, crank operated.
Cindy Lift
The Cindy Lift is a seat transfer lift aid designed to make lifts more manageable for caregivers and the individual being assisted and to broaden accessible areas for its user. The lightweight aluminium frame allows for quick transfers in a three-step process. This unit adjusts to the user's body and reduces the weight of its occupant for the lifter. The narrow profile fits through doors, halls, and restroom stalls. With this device, the user is able to wear street clothes instead of gowns, and
Classic Brands Reversible Cool Gel and Memory Foam Pillow
The Classic Brands Reversible Cool Gel and Memory Foam Pillow is designed for use by individuals with back or neck pain. The memory foam surrounds a pad of cool gel material. This cool gel memory foam pillow responds to temperature and pressure to create the ideal support for the head, neck, and shoulders. This pillow is naturally hypo-allergenic and features a removable zip-off cover that is machine washable.
Closed Seat Sling
The Closed Seat Swing is a transfer lift sling designed for use with individuals with lower extremity amputations and others requiring a closed seat. Available in polyester or nylon webbing, this sling attaches to a lifting bar with four adjustable braided nylon straps.
Comfort Carrier Transfer Sling
The Comfort Carrier Transfer Sling is a manual transfer sling designed for use by wheelchair users with spinal cord injury, neurological disabilities, stroke, cerebral palsy, or brain injury. This sling enables wheelchair users to transfer with assistance from two helpers. The sling is slipped around the seated user, then is crisscrossed under the thighs and its buckle is fastened. Two assistants (in front and back or on each side) lift and transfer. The foldable sling is lightweight and machine
Contemporary Styled Transfer Bench (Model 77356)
The Contemporary Styled Transfer Bench, model 77356, is a bathtub transfer bench designed for use by individuals with balance, lower extremity, or mobility disabilities. This bench has a contoured seat back with a handle for removal, sturdy legs with non-slip rubber feet, and a split seat with built-in drainage. The split seat allows the user to tuck in the shower curtain to avoid water leaking on the floor. The bench is reversible for shower use. OPTIONS: Shower Holder Attachment (model 77010);
Couch Cane
The Couch Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a crook-shaped handle with a cushioned grip on an adjustable powdercoated shaft resembling a standard cane affixed to a base with non-skid pads. This device can be used at either end of a couch or on either side of a large chair or recliner. The base slides under the furniture for stability and the handle can be used to assist in sitting down or in rising to a standing position.
Curved Transfer Board
The Curved Transfer Board is a transfer board designed for use by individuals who use wheelchairs. Made of solid, reinforced, waterproof plastic that resists chipping, shattering, and splintering, this board has tapered ends and a smooth surface for easy sliding. The curved design accommodates a variety of transfer situations, and slip-resistant pads on the underside at each end increase stability. DIMENSIONS: 27 5/8 inches long and 14 5/8 inches wide tapering to 10 1/8 inches wide in the middle
Deluxe Transfer Board (Models Nc94205 & Nc94205-B)
The Deluxe Transfer Board, models NC94205 and NC94205-B, is designed to assist people who use wheelchairs. The Deluxe Transfer Board (NC94205) is made from 0.5-inch thick birch and tapers at both ends for transfers. The Bariatric Transfer Board (NC94205-B) features two hand holes and a heavy duty 9 ply birch wood base with 3 additonal piles form-laminate on top. CAPACITY: 450 pounds for NC94205 and 650 pounds for NC94205-B. DIMENSIONS (WxL): 8 x 24 inches for NC94205 and 10 x 32 inches for NC942
Deluxe Wood Transfer Board
The Deluxe Wood Transfer Board is designed for use in transfers to and from wheelchairs. This solid hardwood board has tapered ends and is urethane coated, sealed, and polished for smoothness. The board has a cut-out handle for gripping and carrying. DIMENSIONS (LxW): 30 x 8 inches. CAPACITY: 250 pounds.
Diana Lift
The Diana Lift is a free-standing powered or hydraulic transfer lift designed for use with individuals with mobility disabilities. Available in mini, compact, and comfort models, the lifts come a choice of a manual hydraulic pump lifting mechanism or an electric motor and push-button controls. All models feaure a tip-free U-shaped base, easy-grip handlebars, a pinch-free boom arm, and four heavy-duty ball bearing double caster wheels for mobility. Two wheels are equipped with parking breaks for
Digital Scale (Model Bf 878)
The Digital Scale, model BF 878, is a transfer lift scale attachment designed to enable individuals with mobility disabilities to be weighed in a transfer lift. The compact self-contained scale attaches to the lift and provides a digital readout in pounds and kilograms. Calibrated to 0.1 percent in acuracy, this scale features automatic shutoff to conserve battery life. POWER: Uses one 9-volt lithium battery to provide approximately 3,000 readings. DIMENSIONS: 3 x 3 x 4 inches. CAPACITY: 400 pou
Dolphin Patient Positioner
The Dolphin Patient Positioner is a transfer lift sling designed for use with individuals with mobility disabilities. Designed to aid in patient repositioning during the use of a lifting sling, this dolphin-shaped unit enables patients to be lifted or repositioned to or from a sitting or reclining position. Individuals lifted from a sitting position will remain sitting up unless being positioned in or to a bed. In those instances, as the upper body reclines, the unit automatically adjusts to ena
Dr. Joseph's Universal Adl Accessories
Dr. Joseph's Universal ADL Accessories are a footbrush, inspection mirror, dressing hook, leg lifter, and shoe horn designed for use by individuals with diabetes and mobility disabilities or arthritis. Designed to provide hygiene, inspection, and care of the lower leg, ankle, and foot, the components are available individually to enable the user to select only those items that are needed. Available components include the universal long handle only, the universal handle with footbrush, a packag
Drive Medical Bariatric Heavy Duty Canvas Sling
The Drive Medical Bariatric Heavy Duty Canvas Sling is a manual transfer sling designed for use by individuals with mobility and balance disabilities. This heavy-duty canvas offers heavy duty support to floor lifts. The solid design fits well with any décor and the canvas material provides strength. Ideal for use with electric or manual lifts, these slings can also be used just be four individuals if necessary.
Drive Medical Full Body Patient Lift Sling
The Full Body Patient Lift Sling is designed for use by individuals with mobility and balance disabilities. This sling is adaptable to any situation and works with any floor lift and has a commode cutout and four sling points. The mesh-design is made of polyester product and does not require an optional chain or strap and can withstand a weight capacity of 600 pounds. This sling includes 4 or 6 cradle points.
Drive Medical Seat / Back Patient Lift Sling
The Drive Medical Seat / Back Patient Lift Sling is a transfer sling designed for use by individuals with mobility and balance disabilities. This basic sling uses chain links to attach to the Patient Lift. This provides a large range of positions and angles that the sling can be adjusted to. Additionally, the sling is designed for transporting someone in a sitting position and is suited for someone with limited mobility.
Dycem Non-Slip Material Roll, 16 Inches x 3-1/4 Feet, Red
The Dycem Non-Slip Material Roll, 16 Inches x 3-1/4 Feet, Red is a product designed for those individuals with upper extremity disabilities to use. Original Dycem anti-slip material is 0.4 millimeters thick. It is non-slip on both sides and flexible. Flexibility allows it to flex and fit around an object. Users cut piece from reel to get the size they need. The material can be used for a variety of applications: gait re-education and balance activities; under hands, feet and knees; to stabilize
Dycem Non-Slip Material Roll, 16 Inches x 6-1/2 Feet, Yellow
Dycem Non-Slip Material Roll, 16 Inches x 6-1/2 Feet, Yellow is a product designed for occupational therapists to use in long term care facilities. The non-slip material is used to help stabilize objects, hold objects firmly in place, or to provide a better grip. Reusable and easy to clean. Good for childcare centers, nursing homes and schools.
Dycem Non-Slip Material Roll, 8 Inches x 10 Yards, Black
The Dycem Non-Slip Material Roll, 8 Inches x 10 Yards, Black is a product designed for those individuals with upper and lower extremity disabilities to use in a variety of applications: gait re-education and balance activities; under hands, feet and knees; to stabilize equipment or limbs in weight bearing exercises; under plates for eating and dining; beneath people's feet and on seats to help improve positioning and posture when standing or sitting. It is non-slip on both sides and flexible. Fl
E-Wheels EW-36 3-Wheel Electric Senior Mobility Scooter - Blue
E-Wheels EW-36 3-Wheel Electric Senior Mobility Scooter - Blue is a product designed to help individuals with lower extremity disabilities do independent transportation. It provides up to 45 miles on a single charge (charger included). Also included, is a reverse switch, armrest and large storage basket. Equipped with digital anti-theft alarm and two rear shock absorbers in the frame. Transaxle differential brushless motor; 3-wheel high-powered scooter with a brushless electric motor. Up to 45 m
E-Wheels Stand-N-Ride 3-Wheel Electric Mobility Scooter - Blue
The E-Wheels Stand-N-Ride 3-Wheel Electric Mobility Scooter - Blue is a device designed to help individuals with lower extremity disabilities to allow for independent transportation. 20-25 mile range on a single charge. Offers maximum safety and security. Removable seat. Foldable steering column, Ships fully assembled and ride ready. Good for recreational and commercial use in warehouses, college campuses, residential communities, security patrol and more.
E-Zee Gait Belt (Models 6524V & 6528V)
The E-Zee Gait Belt, models 6524V and 6528V, is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers for people with balance, lower extremity, mobility or walking disabilities. This machine-washable cotton belt has Velcro closure for easy application. DIMENSIONS (LxW): 62 x 2 inches. The belt fits 24- to 52-inch waists. COLOR: Model 6524V is white and model 6528V is navy.
Easy Mover Slide
Transfer aid made of unbreakable material and sealed steel bearings on a track. Eliminates need of physical lifting by attendant. Moves 650 pounds up or down a 20 degree incline. Available in 8 by 8 inch, and 8 by 12 inch seats. Overall size 8 inches by 30 inches.
Easy Pivot (Model Ep-250 & Ep-250/dr)
The Easy Pivot, model EP-250, is a hydraulic transfer lift designed for institutional and home use. This device uses a technique similar to standing pivot transfer: the person transferring bends over chest pad with a safety belt around hips and a front knee pad to prevent the knees from moving. This no sling approach minimizes skin injury during transfer and facilitates removal and adjustment of clothing in daily hygiene. FRAME: Welded tubular steel frame with a locking caster base. FEATURES: An
Easy Pivot Transfer Machine (Models Ep-100, Ep-100/dr, Ep-200, Ep-200/dr, Ep-300, & Ep-300/dr)
The Easy Pivot Transfer Machines are mechanical transfer lifts that duplicate commonly used standing pivot maneuver used for assisted transfers and eliminates need for weight support by an assistant. The user's legs are positioned against a padded knee retainer and the user leans over a cushioned chest pad. The assistant secures leg and shoulder straps and then pulls lever handle up to lift person to the transfer position. The user's feet and knees are stabilized as torso is raised to lift the b
Easybelt (Models 6012, 6013, 6014, & 6015)
EasyBelt, models 6012, 6013, 6014, and 6015, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt has strong vertical and horizontal handles for gripping support and can be used for sitting transfers or for supporting an individual when standing or walking. Made of moisture- and soiling-resistant nylon. SIZES: Extra small, with 5 handles (6012), small, with 7 handles (6013), medium, with 9 handles (6014), or large, with 11 handles (601
Easyglide (Models 5020, 5050, 5060, & 5070)
The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model
Easypivot (Model 85 And 85/dr)
The EasyPivot, Model 85, is a mechanical transfer lift designed to assist in transfers from wheelchair to bed or shower for individuals who need total lift assistance, such as multiple sclerosis or spinal chord injury patients. This lift has dual lift handles which promotes good caregiver's body mechanics and reduces strain, helping to prevent back injuries. The patient places their feet on the base of the machine and then leans forward against the chestpad. When the patient is strapped, the car
Easyslide (Model 1030)
The Easyslide, model 1030, is a transfer aid designed to assist caregivers in transferring individuals with mobility disabilities to X-ray, treatment, or operating tables; stretchers; or shower stretchers or to move the individual in bed. This tubular device consists of a protective woven nylon cover coated on one side with polyurethane and a quilted mat with a woven cotton outer shell; a woven, ultra-low friction nylon liner; and flame-retardant trevira padding. To use the slide, the individual
Easyslide (Model 1230)
The Easyslide, model 1230, is a transfer aid designed to assist caregivers in transferring individuals with mobility or severe physical disabilities. It can be used for transfers between beds and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfort in transferring, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polye
Easyslide (Model 1480)
The Easyslide, model 1480, is a transfer aid designed for use in moving individuals with mobility disabilities. It can be used to aid in transferring between beds and x-ray or operating tables, shower trolleys, or cots. This transfer aid has a soft, padded outer surface for comfortable transfers, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIM
Easyslide (Models 2010, 2015, 2020, & 2030)
The Easyslide, models 2010, 2015, 2020, and 2030, is a transfer aid designed to assist caregivers in moving or transferring individuals with mobility disabilities. It can be used in transferring between bed and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfortable transfers. Models 2010 and 2015 are made of polyester with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved wit
Easytrack 2 Post, 3 Post, & 4 Post Systems
The Easytrack System is an overhead ceiling lift system designed for use with individuals with balance disabilities, cognitive disabilities, lower extremity disabilities, mobility disabilities, severe physical disabilities, and spinal cord injury. The system comes in a kit with no tools required and fits most standard ceilings in homes. The non-slip neoprene surface on both the foot plate and top plate ensure that the posts stay in place. The 2 Post System is designed to ease transfers. The 3 Po
Econoglide Transfer Boards
The Econoglide Series are Transfer boards designed to assist people with physcial disabilities in transferring from one surface to another. The boards are fabricated high density stress-relieved linear plastic. The moisture-proof boards are striate-sanded on one side and buff-sanded on the other. Models include the plain board, board with telescope and hand hole, board with hand hole, board with 2 hand holes, board with hand hole and notches, and board with 2 hand holes and notches. CAPACITY: 40
Econoslide Series Transfer Boards
Econoslide Series Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are made from defect-free 7-ply birch plywood and have rounded corners, ends, and edges. The surface is machine-sanded and finished with clear lacquer. Models include the plain board, board with hand hole and telescope, board with hand hole, board with hand hole and notches, board with 2 hand holes, and board with 2 hand holes and notches. CAPACITY: 400 pounds. DIMENSIONS: All model
Elevator 350 Patient Lift
The Elevator 350 Patient Lift is a seat lift designed for use by individuals with balance, standing, mobility and walking disabilities or arthritis or spinal cord injury. This wheeled lift is lightweight and intended as an aid in lifting a person from floor level to a maximum height of 30 inches and transporting him or her, while seated, over short distances. It can be used in the home or in institutions. The lift's frame is constructed of powder coated, scratch resistant aluminum. It also featu
Elevator 700 Patient Lift
The Elevator 700 Patient Lift is a seat transfer lift designed for use by individuals with balance, standing, mobility and walking disabilities or arthritis or spinal cord injury. This wheeled lift is lightweight and intended as an aid in lifting a person from floor level to a maximum height of 31 inches and transporting him or her, while seated, over short distances. It can be used in the home or in institutions. The lift's frame is constructed of powder coated, scratch resistant aluminum. It a
Equestrian Lift
The Equestrian Lift is a powered, mobile overhead transfer lift designed for transferring individuals with neurological, mobility, or lower extremity disabilities or spinal cord injury from a wheelchair or chair to a horse. This lift, which is based on the Pilot Lift (see separate entry) platform, uses a vertical lifting motion and can be used for transfers from the floor, a platform or a vehicle to a horse, and vice versa. It has three-way directional movement to allow for use with the horse po
Ergolift & Ergolift Wl
The Ergolift and the Ergolift WL are powered transfer lifts designed for use with individuals with balance, lower extremity disabilities, and severe physical disabilities and spinal cord injury. The Ergolift is a mobile floor lift. The control box gives the user access to the emergency stop and lowering devices, the visual and auditory low battery indicator, charge indicator as well as the same controls as the hand set. The handset controls the start and stop and the 2-speed vertical movement. T
Ergonomic Walking Belt (Model 6534)
The Ergonomic Walking Belt, model 6534, is a gait belt designed for use with individuals with mobility and balance disabilities. This wide, machine-washable cotton belt features buckle closures, plastic handles on either side, and a cotton handle in the back to provide secure grips for therapists and care givers. SIZES: Small (fits waists 26 to 34 inches), medium (fits waists 33 to 38 inches), large (fits waists 36 to 46 inches), and extra large (fits waists 44 to 52 inches).
Ergostand
The Ergostand is a standing transfer aid designed to be used by individuals with balance, lower extremity, mobility, and severe physical disabilities. The Ergostand can be used to dress, clean and transfer individuals in need of additional support. The individual is supported by a band sling with a Velcro waist enclosure reinforced with two belts. A back support, a padded knee support and an anti-slip foot base ensure safety. Control of start and stop, motorized base, and 2-speed vertical moveme
Essential Hardwood Transfer Board (Model P2300)
The Essential Hardwood Transfer Board, model P2300, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This hardwood board is sealed and highly polished for ease in sliding and features a tapered end and one hand cut-out. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 250 pounds.
Essential Plastic Transfer Board (Model P2301)
The Essential Plastic Transfer Board, model P2301, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This high-impact plastic board has a smooth surface for ease in sliding and features a tapered end. DIMENSIONS (WxL): 8 x 27.5 inches. CAPACITY: 250 pounds.
Eva Mobile Lift (Model 450Ee)
The Eva Mobile Lift, model 450EE, is a powered transfer lift designed for use in transferrring individuals with mobility or severe physical disabilities. It can lift an individual from a seated or prone position, and can also be used for gait training in combination with lifting accessories such as a gait belt.
EWheels EW-02 Folding Heavy-Duty Bariatric Scooter
The EWheels EW-02 Folding Heavy-Duty Bariatric Scooter is a unit designed to help individuals with lower extremity disabilities to allow for transportation. This device goes 43 miles per charge.
EWheels EW-29 Electric Trike Tricycle Scooter - Red
The EWheels EW-29 Electric Trike Tricycle Scooter - Red is designed to help individuals with lower extremity disabilities do independent transportation. The user can either pedal it as a regular bicycle or ride it 100 percent electric or combine both modes. Oversized seat with backrest; LED front light; front and rear storage baskets, good for groceries or for a pet to ride in. Travels up to 20 miles on a single charge.
EWheels EW-52 Powerful Four-Wheel Luxury Scooter
EWheels EW-52 Powerful Four-Wheel Luxury Scooter is a product designed to help individuals with lower extremity disabilities do independent Digital dashboard; 3-speaker stereo system;, cruise control; locking cargo box; alarm system; and remote key fob*. USB Port. Turn Signals, Brake Lights, High/0Low Beam Lights. Battery Indicator Gauge. Clock. Thermostat. Keyless Fob Start/Stop operation. Alarm System/Keyless. Extra Wide Tubeless Tires. Variable Speed Twist Throttle. Foot Brake. Large Rear Loc
Extra Care Bariatric Lift (Models Gt1000 & Gt1000S)
The Extra Care Bariatric Lift, models GT1000 and GT1000S, is a powered transfer lift designed for use with individuals with balance, lower extremity and severe physical disabilities, obesity or spinal cord injury. The freestanding unit has a mobile base with four casters. The rear casters lock. The manually adjustable legs extend horizontally to increase the length of the base and enhance stability; the legs retract for storage. The base supports a vertical support from which an angled boom ext
Extra Care Bariatric Lift (Models Gt700 & Gt700S)
The Extra Care Bariatric Lift, models GT700 and GT700S, is a powered transfer lift designed for use with individuals with balance, lower extremity and severe physical disabilities, obesity or spinal cord injury. The freestanding unit has a mobile base with four casters. The rear casters lock. The manually adjustable legs extend horizontally to increase the length of the base and enhance stability; the legs retract for storage. The base supports a vertical support from which an angled boom exten
Extra Wide Perineal Cutout Tub Transfer Bench (Models Cq-1730Xdl & Cq-1730Xdr)
The Extra Wide Perineal Cutout Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This extra-wide bench has a perineal opening for personal hygiene and fits standard bathtubs at least 22 inches wide at the center. This bench features vinyl grips on the tubing to prevent marring the tub; a removable short back that discourages reclining; and, "Tube in a Tube" construction for added strength. The bench is available in a wall to left
Ez Pull Sheet
The EZ Pull Sheet is a transfer aid designed for use in positioning and turning individuals with mobility disabilities in bed. This transfer aid is constructed of a layer of soft cotton/poly material on top, and a layer of nylon on the bottom. The tight weave of the top layer is such that the sheet has intrinsic liquid barrier characteristics so it offers incontinence protection. The EZ Pull Sheet has double-stitched seams and five integrated handles. It can be machine washed and dried and is w
Falls Recovery Lifting Device
---- PROTOTYPE --------- PURPOSE: To design a device for an individual with mobility disabilities to provide a safe and reliable means to return to his wheelchair after a fall. The Falls Recovery Lifting Device consists of a hydraulic jack, an aluminum base, and stand with a 22 inch attached seat. The jack is a three-ton, long-ram bottle jack, normally used in cranes and engine hoists, which travels vertically by manually pumping a one-piece handle. When the chair is pumped to the desired height
Firefly Upsee
The Firefly Upsee is an upright walking device for children with neuromuscular disorders or motor impairments, such as cerebral palsy. The three part kit, allows a child to be attached to their parent, while in a stable, vertical position. The child's feet are also positioned parallel to his or her parent, allowing for smooth movement while walking. The Upsee is suggested for children ages 1 to 8 years of age.
Flexibelt (Models 6023, 6024, 6025, & 6026)
Flexibelt, models 6023, 6024, 6025, and 6026, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. The belt has a polyester surface for comfort against the body, with strong vertical and horizontal handles for gripping support. SIZES: Small with 7 handles (6023), medium with 9 handles (6024), large with 11 handles (6025), or extra large with 13 hand
Flexigrip (Model 6090)
FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.
Fleximove (Models 3012, 3020, & 3030)
The Fleximove, models 3012, 3020, and 3030, is a transfer aid designed for turning, positioning, or transferring an individual with mobility disabilities. This unit can be used for moving patients further up in bed or to and from a wheelchair. 3012 has an inner surface made of moisture-resistant nylon for environments with special hygiene requirements, while 3020 and 3030 have a softer, more comfortable velvet surface. DIMENSIONS (LxW): 60 x 20 centimeters (3012, 3030) or 50 x 20 centimeters (30
Fleximove (Models 4011, 4012, & 4016)
The Fleximove, models 4011, 4012, and 4016, is a transfer aid designed for turning, positioning or transferring an individual with mobility disabilities. A padded board with handles and an inner surface of polyester, the unit can be used for moving patients further up in bed, turning over, sideways transfers, or when a patient must be lifted from the floor after falling. Models 4011 and 4012 consist of four handles; model 4016 consists of six handles. DIMENSIONS (LxW): 102 x 43 centimeters (4011
Foot Wranglers
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual to uses a wheelchair to lift his/her feet onto the footplates. Create a large loop at the end of a length of parachute cord (available at hardware stores). Place the loop around the foot and use the remaining cord to pull the foot onto the footplate. The cord is lightweight and can be conveniently carried along. MATERIALS: Parachute cord. AUTHOR: Labbe, A. TITLE: Quest Extra: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.or
Freedom Safety Booster (Models 75579 & 75582)
The Freedom Safety Booster is a transfer aid designed to aid in positioniing in bed individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pull the device toward the headboard to move the individual up in the bed. The unit is machine washable and disinfectant safe. It shou
Freedom Turner (Model 75638)
The Freedom Turner is a transfer aid designed to aid in turning or transferring individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pulls the device toward themselves. Once the Turner is in place, it can also be used by one caregiver to turn a side-lying individual on to
Friendly Bed System (Model Eb)
The Friendly Bed System, model EB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits king, queen or double conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboa
Friendly Bed System (Model Fb)
The Friendly Bed System, model FB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits queen, double, and twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footb
Friendly Bed System (Model Tb)
The Friendly Bed System, model TB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboard). The ends ar
Friendly Bed System (Model Tb/hw)
The Friendly Bed System, model TB/HW, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin beds with a Hollywood style frame. The system’s frame has two end pieces that are placed beyond the head and foot of the bed. The ends are connected by two pa
Full Stretcher Sling & Partial Stretcher Sling
The Stretcher Slings are transfer lift slings designed for use with stretcher transfer lifts for individuals who require lifting in a reclined position. The Full Stretcher Sling is made of polyester webbing and features eight nylon mesh straps and two removable reinforcing back stabilizers that can be removed for laundering.
Gait Training Belt
The Gait Training Belt is a gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This cushioned belt features two nylon web handles for secure grip and hook-and loop closure. SIZES: Small (fits waists 30 to 34 inches), medium (fits waists 34 to 40 inches), or large (fits waists 36 to 46 inches). DIMENSIONS: The belt is three inches wide and the hook material for closure is 14 inches long.
Gimme A Lift
Gimme a Lift is a transfer aid designed for use by individuals with balance or lower extremity disabilities who are able to bear weight or are ambulatory. Designed for use in home, work, or institutional health care settings, this device can be used unattended by the individual or with the assistance of a care giver. The unit lifts and lowers individuals to stand up, sit down, sit up, or lie down. It supports walking and transfers to walkers, chairs, and wheelchairs. In the assisted mode, a nurs
Glide 'n Go Transfer Seat Bifold
The Glide æn Go Transfer Seat Bifold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This flip-down power lift seat raises the user from a wheelchair to vehicle seat level to enable the user to enter and exit an extended cab pickup truck. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The foldaway seat design allows
Glide 'n Go Transfer Seat Single-Fold
The Glide æn Go Transfer Seat Single-Fold is a powered transfer seat designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This power lift seat works with full- or mid-size SUVs, minivans, or short cab pickup trucks. The system is operated by unfolding the safety arm and pressing the ôupö button. No structural modifications or holes are required for installation. The lift works on either the driver or passenger side in the first or second row of sea
Golvo
The Golvo Lift is a powered, mobile overhead transfer lift designed for use with individuals with severe physical, mobility, or lower extremity disabilities or spinal cord injury. This lift uses a vertical lifting motion and can be used for transfers from the floor or from one surface to another. Features include a lift bar with lifting strap and retractable arm rests for the user and caregiver to hold on to for added security. The base is equipped with locking casters. Parallel and symmetrical
Grip-N-Assist Professional
Grip-n-Assist Professional is a transfer aid designed for use with individuals with mobility, walking or standing disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. It designed for heavy use in domestic, institutional and professional settings. The belt can be worn by the person with a disability and held by the caregiver or worn the caregiver with the person with a disability holding the handle. The belt is secured by an adjustable str
Grip-N-Assist Standard
Grip-n-Assist Standard is a transfer aid designed for use with individuals with mobility, walking or standing disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. It is intended for light and moderate domestic use. The belt can be worn by the person with a disability and held by the caregiver or worn the caregiver with the person with a disability holding the handle. The belt is secured by an adjustable strap that fastens with a Velcro st
Guldmann Mobile Lifter (Models Gl2, Gl3, Gl4, & Gl Hd)
The Guldmann Mobile Lifter, models GL2, GL3, GL4, and GL HD, is a mobile powered transfer lift designed for use by caregivers moving, lifting, and transferring individuals with severe physical disabilities or spinal cord injury. This ergonomic unit has a large capacity and lifting span, with space for both caregiver and user. It lifts from floor level and from wide beds, and can lift tall users in large slings. It operates with Guldmann ABC lifting slings of various sizes. The unit moves on cast
Hammock Sling
The Hammock Sling is a transfer lift sling designed for use with individuals with mobility disabilities. Available in nylon mesh or quilted, polyester padded material, this launderable, quick-drying sling permits transfer in a variety of seated positions and provides full head and body support with access for toileting. This sling is equipped with head and leg straps with loops for various sitting positions.
Handi-Lift Walk Belt (Model 516Xm, 516M, 517M, 518M & 518Xm
The Handi-Lift Walk Belt, models 516XM, 516M, 517M, 518M, and 518XM, is a standing transfer aid designed for use to aid transfers by individuals with balance, lower extremity, mobility, or walking disabilities. The belt is secured with a double Velcro closure, and its Miracle Grip inner lining grips the patient's clothing. The belt has four large padded vertical handles. It is normally used by two caregivers working together, but if necessary, one caregiver with training can use the belt with a
Handler, The
The Handler is a transfer aid designed for use with individuals with mobility disabilities during transfers to the commode, bed, or wheelchair.. The device is a strong polyurethane plastic sling that conforms to the individual's body and features two sets of handhold holes for appropriate hand placement during lifting. DIMENSIONS: 21.5 x 8.5 inches.
Handybar
The HandyBar is a car transfer aid designed for use by individuals with arthritis, balance, or mobility disabilities. Made of forged steel with an ergonomic foam-cushioned handle, this device fits in the U-shaped door striker of most cars to create a handle for extra leverege to aide in getting out of a car. The device can also be used to break automobile windows or cut seat belts in the event of an emergency. CAPACITY: 350 pounds.
Hardwood Transfer Boards
Hardwood Transfer Boards are designed for individuals with mobility disabilities to transfer from their wheelchair to a bed, chair, toilet, etc. Made of solid, smooth-finish. Tapered ends for easy use.
Hat Sensors
The Hat Sensors are sensors designed for seventeen-year-old Nhi and those individuals who are visually impaired to sense objects above their waist. Can be attached to a hat or to clothes.
Headrest Sling (Models 9013 & 9014)
Head support for use with patient lifters. Straps attach to lifter bar.
HealthCraft Advantage Pole
The HealthCraft Advantage Pole™ is a product designed for patients with mobility disabilities to use in their home or anywhere they need extra support.
HealthCraft SuperBar Add On Kit
The HealthCraft SuperBar Add On Kit™ is an accessory to the HealthCraft Standard SuperPole™ designed to create exceptional vertical and horizontal support. Water Resistant. The SuperBar has eight locking positions, one every 45 degrees, for superior centralized support as the user moves. Lift the rail and move the bar to automatically lock it into the next position. The SuperBar, when strategically placed in the user's home, offers support that can be placed where the user needs it, moving with
HealthCraft SuperTrapeze Add-On Kit
The HealthCraft SuperTrapeze™ Add-On Kit is an accessory to the HealthCraft Standard SuperPole™ designed for use by individuals with balance, walking, or mobility disabilities to get in and out of bed easier. For commercial and residential use. By redesigning the triangular shape to include two points of leverage, the user can maximize on strength to climb more easily into a seated position. The new, ergonomic design also reduces wrist strain. Once in a seated position, the SuperPole™ also provi
Healthsmart Suction Cup Grab With Bactix
The HEALTHSMART Suction Cup Grab Bar with BactiX is designed for use by individuals with balance, mobility, or lower extremity disabilities. It offers short-term balance assistance and will suction onto any non-porous surface, such as a shower wall. Grab bars are used as a temporary of additional support when entering or exiting the shower or tub. The HEALTHSMART Suction Cup Grab Bar is infused with BactiX™ antimicrobial protection. BactiX acts as a shield against germs, odors, stains, molds,
Heavy Duty Patient Lift (Model Bcwlift)
The Heavy Duty Patient Lift, model BCW750TC, is a powered transfer lift designed to assist in transfering obese patients who have physical disabilities. This lift enables a caregiver to safely and easily lift and move a patient along an overhead track to a bed, chair, bath or commode. It is a powered lift with a transfer device to move the sling along and overhead track to the desired location. The lift track is made of aluminum alloy for lightweight, strength, and durability, and features a dou
Hi D Transfer Board (Model Bk6111)
The Hi D Transfer Board, model BK611, is a transfer board designed for use by individuals with mobility disabilities. Made of polyethylene plastic, this transfer board features a smooth easy slide surface with round corners and centered hand slot. DIMENSIONS (LxWxD): 26 x 10 x .5 inches. WEIGHT: 6 pounds.
Hi-Riser
Hi-riser is an electrically operated wall mounted changing table that is suitable for children and adults of up to 440lbs. Despite being extremely robust, the Hi-riser offers a slimline design that ensures it fits easily into most environments. The Hi-riser comes in a choice of powder coated frame for dry rooms and stainless steel frame for wet-rooms. Additional features include: wall and floor mount,
unique stowaway side rail and compatibility with a wide number of hoists. It is also equipp
Hm50 Series Ceiling Track System (Models Hm50, Hm50Rc, Hm50L, & Hm50Lrc)
The HM50 Series Ceiling Track System is a powered overhead transfer lift designed for use by individuals with mobility or neurological disabilities or spinal cord injury. This system enables users to transfer from bed to wheelchair, toilet, or bath, using a motorized lift and either manual or motorized lateral movement along a ceiling track. All models are powered vertically. Models HM50L and HM50LRC are also powered laterally to enable self-lifting and transfer. Models HM50 and HM50RC allow use
Hoyer Hydraulic Patient Lift (Model C Hla)
Hydraulic jack patient lifter, U shape base adjusts in width for narrow doorways or halls, 24 to 34 inches. Guide bars to assist with steering. 400 pounds maximum capacity. Weight 68 pounds.
Hoyer Lifter (Model C-Hla-112-C)
Lift with adjustable base for entering and exiting automobile or bed. 1 piece canvas sling back and seat combination attaches to base bar with chains and straight metal bar. Base width adjusts from 23 to 30 1/2 inches. Foot brakes on 2 casters. Maximum capacity is 400 pounds. Portable, boom and jack separate from base. Must be operated by attendant or companion. Mechanical hand crank or power control can be retrofit. Base needs 6 1/2 inches clearance under beds or cars.
Hugn-Go (Models 100, 200 & 350)
The HugN-Go, models 100, 200 and 350, is a walker with an incorporated sit to stand lift designed for use by individuals with lower extremity, mobility, or walking disabilities. This walker can lift a user from a sitting to standing position and and then provides support as the user walks. The lift mechanism is controlled with a handheld pendant. The unit's integrated sit-to-stand lift can help the user to move in and out of a chair or wheelchair, on and off the toilet, from a seated position on
Human Floor Lift (HFL)-550-P
The Human Floor Lift (HFL)-550-P is designed for use by individuals with balance, lower extremity, or mobility disabilities or arthritis. The lift is designed to help healthcare providers lift patients weighing up to 550 pounds up from the floor without causing injury to the patient. The patients can scoots him/herself to the unit and positions himself on the seat, the provider can activate the lift by pressing the button on the wired remote. This will raise the seat 21 inches, enabling the pati
Human Hoist
The Human Hoist is a battery operated overhead lift and transfer hoist designed for use with individuals with mobility disabilities. The hoist is designed to transform from a tall 26 inches chair to a 4 inch flat creeper and back up again. It is intended for mechanics and others who must work at lower levels.
Hydraulic Patient Lift (Models 9901 & 9902)
Hydraulic jack lifter, mast with adjustable width base. For attendant use. Variety of 1 and 2 piece slings available. Capacity 400 pounds. Base adjusts from 22 to 40 inches wide. Shifter handle for adjusting legs. Low offset base available, 6 inch clearance. Nonadjustable base available. Mast can also be used with tub saddle. Can be used for car transfer. Slings not included. Model 9917 with C base.
Hygiene Sling
The Hygiene Sling is a transfer lift sling designed for use with individuals with mobility disabilities. Made polyester quilted, padded material, this launderable quick-drying sling is designed specifically for toileting and hygiene functions and provides unrestricted access for most users. The sling features leg and shoulder straps with loops for a variety of seating positions. A wide Velcro strap across the chest provides additional support.
In-Bed Patient Positioning System (Model 55036)
The In-Bed Patient Positioning System is a transfer aid designed to aid in positioning and turning individuals who spend extended periods in bed. The system includes a positioning pad with handles and two wedges that support the individual in the desired position. The pad features three layers: a poly-cotton top layer to wick away urine and other moisture, an absorbent foam center layer, and a liquid-proof vinyl barrier to protect the bed. The vinyl-covered bolsters support the side-lying indivi
In-Home Lift System
DO IT YOURSELF ENTRY --- PURPOSE: To provide transfer assistance for an individual with neurological disabilities. A wooden track is mounted it to the ceiling, and in-line skate wheels are used to roll the lift along the track. The carriage is powered with a purchased hoist motor. The harness, composed of a seat from a swing, is attached to the hoist. AUTHOR: Wechsler, K. TITLE: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.org/publications/Quest/q113diy.html. REF: Vol. 11, No. 3,
Inclined Board
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adaptation for individuals with mobility disabilities to use when they fall and have no way getting back up to the raised position. The Inclined Board constructed from a ¾ inch piece of plywood, 22 inches tall by 48 inches long. The board has notches on both sides for the individual to hold and grab on to. At the top of the Inclined Board there are two holes by which a piece of rope can be inserted and knotted securely in place.
Independence Ii
The Independence II is a portable toilet seat lift and commode with seat lift designed for use by individuals with lower extremity or mobility disabilities. The unit can be used as a powered bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The Independence II can be configured as a height-adjustable toilet transfer lift or as a portable bedside commode with its drop-in commode buck
Independence Iv
The Independence IV is a portable toilet seat lift and commode with seat lift designed for use by individuals with lower extremity or mobility disabilities. The unit can be used as a powered bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The Independence IV can be configured as a height-adjustable toilet transfer lift or as a portable bedside commode with its drop-in commode buck
Invacare Knee Walker 65960
The Invacare Knee Walker offers a cushioned substitution for crutches.
This walker features an easy-to-operate ergonomic hand brake, soft knee pad, and easy folding for storage or transport. It provides maneuverability with the 5 inch front swivel wheels and height adjustability for a custom fit. A basket is also standard for this model.
Ix Transfer System
---- PROTOTYPE --------- PURPOSE: To design a prototype of a short distance transfer system for use by individuals with lower extremity and mobility disabilities, people with spinal cord injury and others who use wheelchairs, aided by a caregiver. The IX Transfer System is a transfer aid and transport wheelchair intended for short distance transfers that can be physically demanding on caregivers. It is designed to be used in communal spaces such as a hospital, skilled nursing centers or similar
Jenx Bee Chair
Styled specifically to appeal to very young children and their families, and developed in conjunction with therapists and care-givers, the Bee seating system by Jenx is a playful and gentle introduction to supported seating. Providing a high level of versatility through a comprehensive range of fixed and height adjustable bases, along with a wide variety of head, trunk, leg and foot support options mean each Bee can be exactly tailored to the needs of any individual child. Adjustable back angle
Jenx Supine Stander
Supine Stander is a robust standing support that offers children comfort and safety while standing. Children are supported at the back, leaving their hands free to access items on a tray or table in front of them.
Junior Rocker Therapy Chair
The Junior Rocker Therapy Chair is a vestibular therapy product designed for children with sensory processing disorder and neurological disabilities to sit in. Cradles the entire body for maximum comfort. Safe and secure rocker. Encourages a child to relax as get some calming vestibular therapy as they rock in the Junior Therapy Rocker Chair. Good addition to a sensory room, chill-out space or therapy clinic. Easy to clean.
Kore Kids Adjustable Standard Chair
The Kore Kids Adjustable Standard Chair is an adjustable seat designed for children with Attention Deficit-Hyperactivity Disorder to sit in during sedentary activities such as playing video games or doing homework. Transform boring conventional seating into a playground oasis for a child's imagination. Kore Kids Adjustable Standard Chair is suitable for children of all ages, sizes, and heights. Height is adjustable from 14 to 19 inches.
Lady Shifting
---- PROTOTYPE --------- PURPOSE: To design a prototype of a transfer device to be used by caregivers in transferring a person from a wheelchair to a bed. The Lady Shifting is a transfer aid that allows caregivers to transfer the person for their chair to the bed and vice versa. TITLE: The Assisted Move. WEBSITE: Yanko Design. REF: http://www.yankodesign.com/2013/05/15/the-assisted-move.
Large Leg Lifter Pillow
The Large Leg Lifter Pillow is an orthopedic foam wedge pillow designed for those with lower back pain to provide comfortable knee positioning to gently ease stress on the lower back. This pillow helps to maintain proper pelvic positioning to help decrease low back pressure and pain. The Large Leg Lifter Pillow comfortably lifts the knees, which aids circulation and increases comfort after a back injury or surgery. This pillow can be positioned under the knees or behind the back for comfortable
Leg Lifter (Model Da-5150)
The Leg Lifter, model DA-5150, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This device has a wrist loop at one end and a larger loop for the foot at the other. It extends the user's reach to assist in lifting legs onto or off a wheelchair or bed. DIMENSIONS: 41 inches long. WEIGHT: 87 grams.
Leg Loop Leg Lift
The Leg Loop Leg Lift is a transfer aid designed for use by individuals with lower extremity or mobility disabilities. Constructed of nylon webbing, this device has a foot support that stays open until the Leg Lift strap is pulled. The foot loop support conforms to the shape of the foot for a secure, comfortable grip during transfer onto a wheelchair, footrest, bed, or into an automobile. DIMENSIONS: The leg lifter is 41 inches long and the webbing is one inch wide.
Leg Wrap Positioning Aid
The Leg Wrap Position Aid is designed for individuals with motor or sensory impairments such as hemiplegia, paraplegia, hemiparesis and paraparesis who have limited or no use of their leg(s). The Leg Wrap attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Upper and lower handles allow for more controlled movement and reduce bruising and injury caused by grabbing and dropping the legs. Handles also el
Leglifter
The Leglifter is a leg lifter designed to aid people with lower extremity disabilities to lift their legs from a bedside sitting position onto a bed. The Leglifter has three components - an Airflo compressor, a remote control that connects to the compressor; and a large inflatable pillow that fastens on the right or left side of the bed frame underneath the mattress. The inflatable portion connects to the compressor with an air hose. The user sits on the side of the bed with his or her feet on o
Lexa Lift & Lexa 600
The Lexa Lift and the Lexa 600 are powered transfer lifts designed for use with individuals with mobility disabilities. These lifts adapt to a variety of transfer needs, from bed and floor to bath, commode, wheelchair, and more. The electronic patient positioner adjusts the user to a range of positions from fully lying down to sitting. Both models feature a manual or electrically width-adjustable U-shaped base with four heavy-duty ball bearing caster wheels, two with parking brakes for added sta
Lexa Sling
The Lexa Sling is a transfer lift sling designed for use with individuals with mobility disabilities. This cradling sling offers head support and four heavy-duty lifting straps. The sling is available in a choice of polyester or nylon webbing.
Lifestyle Transfer Board (Models Rtl6044 & Rtl6045)
The Lifestyle Transfer Board, models RTL6044 and RTL6045, is a transfer board designed for use by individuals with balance, lower extremity or mobility disabilities or spinal cord injury. Intended for use in transfers to and from wheelchairs, this board features two horizontal cut-out handles for gripping and carrying. It has rounded corners with tapered ends. The board is made of Baltic birch with a clear lacquer finish. DIMENSIONS: Available in lengths of 24 and 30 inches. CAPACITY: 250 pounds
Lift Walker (Model 214141)
Hydraulically height adjustable lift walker for transfering from bed or wheelchair, or for ambulation training. As a walker the unit raises to elbow height and provides forearm support. Automatic locking spade lift seat is fiberglass reinforced polyester. Plastic parts are injection molded polypropylene. Base and hydraulic pillar are electrostatic powder painted with epoxy polyester finish. Hand operated hydraulic system has 20 inch stroke, 500 mm. Hand pump and lowering button. 4 inch casters.
Liftem
Liftem is a bariatric transfer lift designed for use by obese individuals with severe physical disabilities or spinal cord injury. This powered overhead sling lift raises the user with a four-point lifting bar. The user's starting level can range from floor level up to 52 inches above the floor. The lift has an aluminum steel frame with an underbed clearance of 4.5 inches and an arm that rotates up to 60 degrees. It moves on front and rear casters with brakes in the rear. OPTIONS: Combination sl
Liftup, The
--- "DO IT YOURSELF" ENTRY ------- Overhead lift with powered control system, can be built for under $400. Padded upper body seatless sling is placed around user's back and under arms. Ceiling mounted motor raises user, and lowers. Plans include list and sources for parts required, and directions for installation and use.
Liftvest
The LiftVest is a transfer aid designed for use with individuals with balance and mobility disabilities. This vest-style garment features an attached webbing harness that provides a dozen different hand holds for caregivers to use during assisted transfers. Designed to distribute pressure over the whole torso, this garment eliminates pressure points, and the harness features eight different adjustments to comfortably fit all male and female body types. Because the vest is designed to be an attra
Lightweight Half Step
This Lightweight Half Step is designed for persons with limited lower body mobility or anyone with walking disabilities. It is for those who find going up or down steps challenging. The Lightweight Half Step is designed to reduce the step height for older and for disabled people. It can be used indoors or outdoors. Made from durable recycled heavy duty plastic. Stable in sunlight and freezing conditions. Top of step has a cross hatch design providing a textured, nonslip service. Can be leveled b
Lightweight Plastic Transfer Board
The Lightweight Plastic Transfer Board is designed to aid individuals who use wheelchairs in transferring to and from the wheelchair. Molded of high-impact plastic with reinforcement ribs for maximum stength, this board provides a rigid transfer surface between any two level surfaces. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 220 pounds.
Liko Original Sling & Liko High Back Original Sling
The Liko Original Sling and the Liko Original High Level Sling are transfer lift slings designedfor use with individuals with severe physical or mobility disabilities or spinal cord injury. The Universal High Level sling is intended for situations in which there is difficulty achieving sufficient lifting height. Loop lengths are minimized and the sitting posture is somewhat more reclined than with the standard model. The Original Sling provides support for the entire back and has a slightly high
Liko Scale
The Liko Scale is a scale attachment for transfer lifts designed for use with individuals with lower extemity, mobility, or severe physical disabilities, or lower extremity disabilities or lower extremity amputation. This electronic scale connects to the lift sling bar via a quick-disconnect mechanism. Features include a high visibility liquid crystal display (LCD) readout, and a variety of optional touchpad-accessible functions. CAPACITY: Up to 660 lbs.
Liko Universal Sling & Liko High Level Universal Sling
The Liko Universal Sling and the Liko Universal High Level Sling are transfer lift slings designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. The Universal High Level sling is intended for situations in which there is difficulty achieving sufficient lifting height. Loop lengths are minimized and the sitting posture is somewhat more reclined than with the standard model. The Universal Sling provides support for the entire back. The individual’s a
Likorail
The LikoRail is an powered transfer lift designed for use with individuals with lower extremity, mobility, or severe physical disabilities, lower extremity amputation, or spinal cord injury. This lift can be mounted on the ceiling, wall, or portable overhead frame. OPTION: A variety of sling and lifting options are available. CAPACITY: Up to 550 lbs.
Lite Transfer Board (Model Bk6466)
The Lite Transfer Board, model 6466, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. Made of birch plywood with a lacquer finish, this board has tapered ends and rounded edges for easy sliding. DIMENSIONS (LxWxD): 24 x 8 x .05 inches. WEIGHT: 37 ounces.
Long-Leg Cast Lifter.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Strap attached to a long-leg cast to allow the patient to easily maneuver the cast. Strap made of 1 inch cotton webbing as long as the cast plus enough for a loop, fastened with small rivets, around the foot and another at the top to fit in the patient's hand. Four inch strips of a fastener such as Velcro are attached to the bottom of the foot and the top front of the cast with 5 inch strips of plaster; and to appropriate places on the loops of the str
Lovehandles (Models Lh-18, Lh-16, Lh-14 & Lh-20)
LoveHandles is a transfer aid designed for use with individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This device costists of a carbon frame with a seat and back support. Armrest-style tubular handles on each side and non-slip grips at each top corner of the backrest enable the individual in the device to be transferred by others to and from a pool, wheelchair, boat, automobile, airplane seat, up and down stairs, etc. The device come
Ls400 Toilet Lift
The LS400 Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by individuals with lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom with its ergonomic rear push bar for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS400 can be configured as a height-adjustable toilet
Ls600 Bariatric Toilet Lift
The LS600 Bariatric Toilet Lift is a portable toilet seat lift and commode with seat lift designed for use by heavy individuals with balance, lower extremity or mobility disabilities. The unit can be wheeled from room to room and bedside to bathroom using a rear push bar. for use as a power bedside commode or over-the-toilet motorized lift. During toilet transfer, it reduces the physical force required by caregivers to help users on and off the toilet. The LS600 can be configured as a height-adj
Maxi Sky 1000
The Maxi Sky 1000 is a bariatric ceiling lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This bariatric lift system enables a single caregiver to perform transfers using the handset control without manual lifting. The lift cassette can be installed on a semi-permanent gantry or a permanent ceiling-mounted straight track. A full range of bariatric loop or clip slings can be attached to the four-point sling bar. Regulation of l
Maxi Sky 440
The Maxi Sky 440 is a portable ceiling lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This portable ceiling lift allows a single caregiver to perform transfers using the handset control without manual lifting. The lift has a compact cassette with folding sling hooks and an integrated carrying handle. The lift has a Tarzan hook feature that allows the "swing" transfer of both lift cassette and user directly from one track to
Maxi Sky 600
The Maxi Sky 600 is a powered overhead transfer lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This ceiling lift has a modular track system that allows the track layout to be adapted to a specific working space. The lift can be used for routine transfers of non-ambulatory individuals. A complete range of loop or clip slings is available for use on the applicable 4-point or 2-point spreader bar. The unit can also be used with
Ministretcher (Model 4017)
The Ministretcher, model 4017, is a transfer aid designed for use in transfers of individuals with mobility disabilities in a lying position, mainly to and from an ambulance stretcher, a floor, or on stairs and in other cramped spaces. The unit has padding on each side of a flexible plastic board, which adapts to the shapes of ambulance stretchers, so the transfer aid can remain under patients for the entire journey. The plastic board also gives neck support under the head for safe lifting. DIME
Mjm Transfer Board (Model 600)
The MJM Transfer Board, model 600, is a transfer board designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. The board is made of high density polyethylene, and has eight carrying handles and three web nylon restraint straps with side release plastic buckles. DIMENSIONS (LxW): 71 x 23.5 inches. The restraint straps are 2 inches.
Mobi Changer
The Mobi Changer is a fully mobile changing table that requires no installation or fixing. Its compact and slimline design maneuveres from room to room making it a cost effective option for a multi-user environment. The Mobi Changer is available in a powder coated frame for dry rooms or stainless steel frame for wet-rooms. Additional features include: unique stowaway side rails, height range for easier handling, clearance for hoists and easy-to-clean padded surface.
Mobile Lift Systems (Model 80Xr & 60Xr)
Patient lifts. Mobile Sit Lift has ring seat with arms. Stretcher lift has headrest and footrest. Non-hydraulic mechanical lift mechanism for smoother lifts and ease of maintenance. U shaped base on casters. Optional scale available.
Modrail
The ModRail is a bed transfer aid designed for use by individuals with balance or mobility disabilities. The unit includes a fixed dual rail and a horizontal bar (ModBar) that can be repositioned to an optimal support location. Lift to unlock, hold up to rotate freely, and lower any time to lock. The ModBar pivots and locks every 45 degrees and moves in step with the user. The ModRail assembly secures to ModRail Bracket via a securing knurled knob. ModRail is removable in seconds in case of emer
Molded Transfer Board (Model 6032)
The Molded Transfer Board, model 6032, is a high-impact, heavy duty plastic board with tapered ends designed to assist individuals with mobility disabilities with transfers. The board is 8.25 x 24.25 inches.
Movemaster Patient Mover
The MoverMaster Patient Mover is a transfer aid designed for use by individuals with mobility, lower extremity, or severe physical disabilities or spinal cord injury. This device is manufactured with silver ion antimicrobial built in for the life of the board. It features anti-pinch hand holes, anti-static inhibitors, and an ergonomic design. The unit is made from high-density stress-relieved polyethylene and is x- ray translucent. Model 2018 is a stretcher model and model 2022 is a hospital mod
Multi-Lift
The Multi-Lift is a powered sling transfer lift designed for use by individuals with mobility disabilities. This portable lift can be used to transfer the user into or out of a car or other vehicle, or to or from a bed, sofa, toilet, or bath. It can also be used to lift a scooter or power wheelchair into a station wagon or minivan. It comes powder coat painted finish is standard and a wide variety of slings is offered. POWER: Uses 12v/25A Surge, 20A Continuous. OPTIONS: Home wall mount, home f
Multichair 3000Tx
The MultiCHAIR 3000tx is a combined toilet chair, shower chair, and bathtub transfer bench designed for use by individuals with lower extremity or mobility disabilities. It has a nylon cloth back; an adjustable height raised toilet seat; a seamless padded self-skinning urethane seat cushion; two swing-away locking side arms; a swing-away transfer cushion kit; a drop rail on one side; suction cups for attaching legs to the bath or shower floor or for attaching the unit to the vertical face of the
Multifunctional Sling Lift/transfer System (Model C3)
Manually operated sling/stretcher transfer aid. Tubular steel frame with polyester sling for seated transfers uses no chains; hand crank with screw jack to lift patient. Can transfer floor to bed heights. Options include: stretcher frame attachment for supine patients; electronic scale; seated sling with head support; additional sling $250.00. Overall height of mast 60.25 inches. Lifting range 34.25 inches. Maximum lifting capacity 350 pounds. Base: 39.25 inches long. Adjustable width 34 3/4 to
Multimover
The Multimover is a transfer aid designed for use with individuals with mobility disabilities. The device is a nylon tibe which is placed under an individual aid in positioning in bed. The double-layer design enables the top layer to slide over the bottom layer, repositioning the individual. The unit folds for carrying and includes instructions. DIMENSIONS: 47 x 28 inches.
New Technology Crutches
New Technology Crutches are supports designed for My and for others with upper and lower extremity disabilities to help them walk. It is similar to crutches or a walker and can rest under the user's forearm.
Norco Leg Lifter (Model Nc94301)
The Norco Leg Lifter Assist, model NC94301, is a leg lifter and leg positioning aid designed for use by people with physical disabilities. The device consists of an aluminum rod and foothold covered with webbing. A hand loop is located at one end and a larger foot loop at the other. The lifter is covered with 1-inch wide, soft nylon webbing. The 10-inch loop foothold is bendable. DIMENSIONS: The rod is 22 inches long. The total length including hand strap is 42.5 inches.
Offset Sliding Board (Model 6115)
The Offset Sliding Board, model 6115, is a lightweight birch transfer board designed to fit around the wheel of a wheelchair when the armrest is removed. A hand slot is cut into the board. DIMENSIONS (LxWxH): 28 x 11.75 x 3/8 inches. CAPACITY: 300 pounds.
One Piece Contour Sling (Model 9005)
One piece sling, extends from knees to shoulders. Chains and hooks included. Headrest available. Available with commode opening.
One Piece Sling With Headrest (Models 117 & 118)
One piece sling, with or without commode opening. Canvas, nylon or dacron open mesh. Built in headrest.
One-Piece Split Slings (Models 123, 125, & 127)
Patient lift sling with leg flaps. Flaps can remain hooked to provide sling seat with commode opening, or be placed around each thigh. 28 inches wide by 30 to 32 inches long. Custom sizes available. Polydura. Can be lined with fleece. Can be used with chains or web straps with standard Hoyer lift.
Original Beasytrans Transfer Board
The Original Beasytrans Transfer Board is designed for use by individuals with mobility disabilities or spinal cord injury to use during transfers. The device provides users with a safe and comfortable way to transfer from bed to wheelchair, from wheelchair to commode or shower seat, to a car and back again. It features a circular seat gliding on a track that supports the user's weight as the transfer occurs. Since there is no lifting involved, the risk of back and brachial plexus type injuries
Original Lift Walker, The
The Original Lift Walker is a walker with lifter designed for use by children and adults with mobility disabilities. This device also functions as a mobile stander, a gait trainer, a transfer assist, and a toilet assist. The hydraulic lifter eliminates the need for manual lifting. The height-adjustable walker is constructed of powder-coated mild steel tubing and disassembles for transport. Standard features include a U-shaped base (available in narrow or standard) with four caster wheels, a choi
Outta Bed
Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa
Padded Swivel Cushion
The Padded Swivel Cushion is a transfer aid designed for use by individuals with mobility disabilities. This cushion provides pressure relief for back and hips while seated. Made of foam, this portable disk rotates 360 degrees to assist with transfers from chairs and cars. The cover is removable making cleaning easier. DIMENSIONS: 15.5 inches in diameter x 2 inch high. CAPACITY: 225 pounds.
Parsons Slide Buddy (Model 14A089)
The Parsons Slide Buddy, model 14A089, is a dual-purpose transfer aid designed for use in positioning and transferring individuals with mobility disabilities. The waterproof nylon slide side has a non-slip base that aids a caregiver in positioning the person when entering or exiting an automobile. The reverse side features slippery nylon and six hand holds to aid in transferring from a bed or sofa. DIMENSIONS: (LxW): 30 x 35 inches.
Patient Full Body Mesh Sling
The Patient Full Body Mesh Sling is a transfer lift sling designed for use with individuals with mobility disabilities. Designed to support and individual during lift and transfer procedures, this full body sling enable patients to be lifted and repositioned from beds to chairs. The sling is reinforced at all four edges for added safety and constructed with a high back section that provides additional support for the head and neck. Other features include a padded inner-thigh section for additio
Patient Lift Scale Attachment (Model 9033)
Scale attachment for patient lifter. Round dial.
Patient Lift Scale Attachment (Models Hls 1 & Hls 2)
Scale attaches to Hoyer patient lifter. Pounds or kilos available. 320 pound capacity. Chrome finish.
Patient Pivot Transfer Disk (Model H70407)
The Patient Pivot Transfer Disk, model H70407, is a standing transfer aid designed for exchanges between one chair and another, or a wheelchair and a bed. The device consists of a rotating platform with ribbed rubber top and bottom faces. The top surface rotates while the bottom remains stationary, and internal friction pads control the rate of turning. DIMENSIONS: Disk is 0.5 inches high, and is available in diameters of 12 inches (H70407-0002) or 15 inches (H70407-0003). WEIGHT: Under 3 pounds
Patient Transfer Belt
The Patient Transfer Belt is a gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable belt consists of double-stitched nylon and Sherpa lined for added comfort. Other features include a plastic side release buckle and four grip point handles for security and to aid the care giver in using his/her legs and body weight during transfers. SIZES: Small/medium (fits waists 24 to 42 inches) or large (fits waists 33 to 5
Patient-Lift Floor Sling (Model 4000)
The Patient-lift Floor Sling, model 4000, is a transfer lift sling designed for use with individuals with balance, mobility, neurological, or severe physical disabilities. This sling is designed specifically to aid in transfers from the floor and allows for even weight distribution to alleviate pressure points. This sling is also useful for transfers from beds to gurneys. SIZES: Small, medium, large, or extra-large.
Patron Tubular Sling
The Patron Tubular Sling is a transfer lift sling designed for use with individuals with mobility disabilities. This sling features powder-coated steel tubing that wraps around the user's torso with adjustable foam-covered arms. A separate strap supports each leg.
Pilot Lift
The Pilot Lift is an exterior seat lift designed to adapt to a variety of transportation and mobility applications. It features three-way directional movement that allows comfortable access to a full 360 degrees and a compact mounting system. The user has easy control of the lift from a hand-held control. The lift has a variety of applications including farm tractors and harvesters, small lawn tractors, pick-up trucks, airplanes and boats. There are three different variations of the Pilot Lift.
Plastic Transfer Board
The Plastic Transfer Board is a general transfer device designed for those individuals with mobility disabilities to make transferring an individual to and from a wheelchair easier. Lightweight plastic board for use in home care and clinical settings.
Portable Ceiling Lift (Model Pc-2)
The Portable Ceiling Lift, model PC-2, is an overhead transfer lift designed to allow transfers in multiple areas without the need for continuous track for individuals who need assistance making transfers. This system allows separate tracks to be installed in areas throughout the home or institution while only using one PC-2. Each track segment is equipped with its own roller bar to which the PC-2 attaches. To use the unit, the lift is attached to the roller bar, the transfer performed, and the
Portable Overhead Bar
DO IT YOURSELF ENTRY --- PURPOSE: To provide a portable, lightweight device enabling a person with limited upper body strength to change position in bed. The device was built from the strong but lightweight expandable tubing used in clothes closets. Quick release pins allow a vertical range from 3 to 4 feet and width range from 3 to 5 feet. The foldable legs are made of Lexan plastic. A canvas strap is pulled tight across the underside of the bed to make the whole unit stable. For travel, every
Portable Patient Lifts (9800 Series)
The Portable Patient Lifts, models 9805, 9806, and 9807 are hydraulic transfer lifts designed to eliminate manual transfers for individuals with limited mobility and strength. The lift supports patients with maximum comfort and prevents unnecessary stress on the caregiver's back. The 9800 Series is designed with an adjustable locking base with three interchangeable base models. A padded swivel bar has a six point hook-up that adapts to all sling styles and positioning requirements. The color cod
Portable Power Lifts 9700 Series (Models 9700 & 9701)
The Portable Power Lifts 9700 Series are hydraulic and powered transfer lifts designed to offer stability and assist caregivers of individuals who have difficulty making independent transfers. These lifts are completely adjustable to fit needs of all users. Each lift has a wide base leg stance for greater stability and they lock in open position for added safety. The height adjusts for all bed sizes and accomodates low tubs. The padded swivel bar offers 360 degree rotation and the six hook desig
Portable Transfer Aid (Model Pta 1000)
The Portable Transfer Aid, model PTA 1000, is a mechanical transfer lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This portable lift uses a hand crank to lift and transfer the user. Caster wheels provide mobility. The lift's legs can be placed either straight ahead or spread apart for transfers, or folded in for storage. When folded, it fits in the trunk of a car without disassembly and can be towed like rolling luggage. OPTIONS: Split
Posey Transfer Belt (Models 6537, 6537Dx, 6537Q & 6537Qdx)
The Posey Transfer Belt, models 6537, 6537DX, 6537Q and 6537QDX, is a transfer aid designed for use with individuals with balance, lower extremity, mobility or walking disabilities. This machine washable, extra-wide soft nylon belt features sewn-on handles that provide multiple vertical and horizontal grasping points. The Standard version of this belt (model 6537) has six grips and fits waist sizes 28-52 inches; and the Deluxe version (6537DX) has seven grips and fits waist sizes 30-66 inches. B
Positioning Slide
The Positioning Slide is a tranfer aid designed to enable a single caregiver to independently move an individual from one side of a bed to the other. This lightweight, smooth, flexible slide is stain resistant and cleans with disinfectant. This latex-free slide features a self-adhesive hook for hanging. DIMENSIONS (LxW): 33 x 22 inches. WEIGHT: 7.8 ounces.
Positioning Sling
The Positioning Sling is a transfer lift sling designed for use with individuals with mobility disabilities. Available in nylon mesh or quilted, polyester padded material, this launderable quick-drying sling permits horizontal transfers from the bed to other horizontal surfaces. Designed to be permanently placed as part of the bedding, the sling has four pairs of straps and features loops to support the head in a variety of positions. The sling can also be used for repositioning and turning.
Powered Person-Lifter
CUSTOM ADAPTATION PURPOSE: To provide a means for a caregiver to lift an individual with multiple sclerosis from the floor after a fall. This lift has a frame made of welded rectangular hollow steel and a three-sided base which is closed at the rear of the device and open at the front. Casters were installed on the two closed corners and on the two open ends, with the casters on the open ends set outside the frame to leave room for the lift seat to move. The rear casters are equipped with brake
Pressure Relief Turning Cushion (Model Ha-4782)
The Pressure Relief Turing Cushion, model HA-4782, is a foam ring seat cushion and turning aid designed for use by individuals who are at risk for developing pressure sores. This doughnut-shaped foam cushion fits the hips to reduce pressure when sitting. It distributes weight evenly and helps the user to maintain the correct posture. It also provides 360 degrees of rotation for turning. A washable cover and non-slip sheet are included. DIMENSIONS: The overall diameter is 400 millimeters and the
Push-Up Frame
The Push-up frame is a transfer aid designed to assist individuals with mobility disabilities in rising from or lowering to a seated position. This metal frame slides under the user and has angled handles with foam padding to assist the user. The frame is collapsible for travel and storage. DIMENSIONS (DxWxH): 11 x 22.5 x 8 inches. WEIGHT: 3 pounds.
Quick-Release Gait Belt (Models 6524Q, 6528Q, & 6531Q)
The Quick-Release Gait Belt is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable cotton belt is available in standard and extra-long styles and features a quick-release buckle. DIMENSIONS: The standard belt fits 24- to 52-inch waists and the extra-long belt fits 53- to 70-inch waists. COLOR: Model 6524Q is white, model 6528Q is navy, and model 6531Q is pastel bouquet (stripe).
Racing Wheelchair Stabilizer
DO IT YOURSELF ENTRY --- PURPOSE: To facilitate transferring a child to a racing wheelchair. The unit has a plywood base with a pipe frame at the front to hold the front wheel; the front wheel is further secured with a Velcro strap. This stabilizes the racing wheelchair for ease of transfers in and out with one person assisting. The half-inch thick plywood base is made to the size of the wheelchair, and excess material is removed to create a lighter weight base. The pipe frame consists of one-in
Raisa Lift
The Raisa Lift is a powered transfer lift designed for use with individuals with mobility disabilities. Standard features include a width-adjustable U-shaped base with four heavy-duty ball bearing, double caster wheels (two with parking brakes), motorized height-adjustable knee pads, a sling that fits under the arms and around the back, easy-grip handlebars, and slip-resistant removable footplates to ebable use as a gait trainer. The lift's Raisa Driver offers motor assisted forward and reverse
Rena 440Ee
The Rena 440EE is a sit to stand lift designed for use by individuals with mobility disabilities. This powered lift can be used to stand, pivot transfer, and move a patient from a seated position. The patient is supported with adjustable shin pads, foot supports, and behind the back supports. The lift's leg sections are wide apart to accommodate a variety of chair types. The lift has power raise and lower functions as well as power leg spreading operated by its hand control. It also has manual a
Resqup Floor Recovery Mobility Aid
The ResQUp ™ is an up-from-the-floor mobility device developed and designed for the specific purpose of aiding patients, healthcare providers, and a wide variety of caregivers in clinical, assistive care, and in-home settings. The ResQUp ™ is particularly useful in situations where an individual does not have the volitional strength or abilities to get up from the floor independently. The ResQUp ™ utilizes an incremental, ergonomically, and physiologically integrated system comprised of 4½ inch
Return 7500
ReTurn 7500 is a manual transfer aid designed for use by individuals with mobility disabilities. This unit can be used to transfer individuals to or from beds, wheelchairs, or toilets. It rolls easily and can support a heavy user. OPTIONS: ReTurn Belt support belt.
Rifton Dynamic Stander
The Rifton Dynamic Stander is a mobile prone stander that provides independence and standing mobility for individuals who use wheelchairs. Additionally, the mobile stander helps strengthen one's motor skills so a user can progress toward independent standing.
Rifton Hygiene Support Station
The Rifton Support Station brings dignity and convenience to hygiene care for people with disabilities. With the Support Station, even partially weight-bearing individuals can undergo hygiene care or a diaper change in an upright position making the process more dignified, improving access to clothing and skin, and eliminating heavy lifting on the part of the caregiver.
Rifton Pacer Gait Trainers
Designed for a wide range of individuals with varying abilities, the Rifton Pacer gait trainers are created to be durable and flexible.
Rifton Sololift (Model R710)
The Rifton SoloLift, model R710, is a powered transfer lift designed for use with individuals up to 76 inches tall with moderate to severe physical disabilities. This transfer device features the SoloVest which is made from medical-grade anti-microbial and anti-slip material and allows for a snug and comfortable above-the-waist lift. The low-profile lift arm lifts in a natural sit-to-stand arc and the swivel lock enables the individual to be transferred to a front loading device. The U-shaped ba
Rifton Solovest (Models 701, 702, & 703)
The Rifton SoloVest is a transfer lift accessory designed for use with individuals up to 76 inches tall with moderate to severe physical disabilities. This transfer vest is made from medical-grade anti-microbial and anti-slip material and allows for a snug and comfortable above-the-waist lift. This vest can be used with the Rifton SoloLift (see separate entry) and with other transfer lifts. SIZES: Small to fit 22- to 34-inch trunk girth, medium to fit 28- to 40-inch trunk girth, and large to fit
Rifton Tram
The Rifton TRAM is a transfer and mobility device designed for the safety, convenience and dignity of both user and caregiver. Offering utility for less cost, the TRAM performs seated transfers and raises a user for standing and supported ambulation.
Rigid Leg Lifter (Models Aa8621 & Aa8623)
The Rigid Leg Lifter, models AA8621 and AA8623, are designed to enable individulas with spinal cord injury and lower extremity disabilities to reposition their legs. Made of reinforced webbing around a rigid yet adjustable metal rod in the center and foot sections, the devices have wrist loops and a foot loops. The wrist loop is flexible webbing for comfort and the foot loop can be bent to accommodate a foot or a cast. DIMENSIONS: Model AA8621 is 41 inches long and model AA8623 is 34.5 inches lo
Roll Aid Transfer Device.
Light weight transfer board to assist in moving person from one level surface to another, can be used for up to 3 inch uneven heights. Four aluminum rollers on frame with steel ball bearings, vinyl roller cover. Attendant can slide person over rollers to complete transfer without lifting the person.
Safe-T-Pole (Model 98120)
Floor to ceiling pole of heavy gauge steel, 1 1/2 inches in diameter. White. Mounts anywhere, no tools required for installation. Assist standing, sitting, climbing stairs or transferring. Adjustable height 7 feet 8 1/4 inches to 8 feet, 2 1/2 inches. Weight 14 pounds.
Safetysure Transfer Belt
The SafetySure Transfer Belt is a manual transfer aid, gait belt, or walker belt for people with balance, lower extremity, mobility or walking disabilities. This belt has numerous hand grips to assist in transfers and gait training. It can also provide equestrian sidewalkers with a variety of leverage points. The anti-slip interior prevents the belt from moving. The easy-to-fasten "fix lock" buckle allows the belt to be tightened without having to open it. SIZES: Small (fits waists 23 to 36 inch
Safetysure Transfer Belt With Sherpa Lining
The SafetySure Transfer Belt with Sherpa Lining is a manual transfer aid, gait belt, or walker belt for people with balance, lower extremity, mobility or walking disabilities. Numerous hand grips provide a variety of leverage points to aid caregivers with transfers, therapists with gait training, or sidewalkers in therapeutic riding programs. The soft synthetic sheepskin lining provides extra comfort and protection for individuals with sensitive skin. An easy-to-fasten "fix lock" buckle allows t
Safetysure Transfer Sling
The SafetySure Transfer Sling is a manual transfer sling designed for use by individuals with mobility and balance disabilities. This device consists of a padded sling with dual webbing handles on each side. The sling is wrapped around the person to be transferred and the handles provide the caregiver with optimum working position to transfer the individual from a bed to a chair or wheelchair, from wheelchair to a toilet, etc. The device can also be used to aid in positioning an individual withi
Sammons Preston Hardwood Transfer Board (Models 6113 & 6114)
The Maple Transfer Board models 6113 and 6114 are transfer boards designed for use by people with mobility disabilities. The boards features a highly lacquered finish and tapered ends. DIMENSIONS (DxLxW): Model 6113 is .75 x 24 x 8 inches and model 6114 is .75 x 30 x 8 inches. Both models taper to 1/8 inch at the ends. COLOR: Natural maple.
Sammons Preston Soft Flexible Leg Lifter (Model Aa8619)
The Sammons Preston Soft Flexible Leg Lifter, model AA8619, is designed to enable individulas with spinal cord injury and lower extremity disabilities to reposition their legs. Made of soft webbing with a semi-rigid center, the device has a wrist loop and a foot loop. DIMENSIONS: 34 inches long.
Sammons Preston Transfer Disc
The Sammons Preston Transfer Disc is a transfer aid designed for use by individuals with mobility disabilities. Designed to assist standing transfers, this portable device comprises a turntable on a base that rotates during transfers. Both the base and the turntable are covered with a non-slip, grooved material for safety. DIMENSIONS: 14 and 15 inches in diameter. CAPACITY: 300 pounds.
Sara 3000
The SARA 3000 is a powered transfer lift designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. The ergonomic design and powered features are designed to enable a single caregiver to provide care during routine handling activities such as transfers and toileting. Features include powered opening and closing chassis, dual controls, low-friction castors with rear brakes, and an emergency stop and system failure override. Other features include kneepad
Sara Lite
The SARA Lite is a powered transfer lift designed for use by individuals with balance, lower extremity or mobility disabilities or spinal cord injury. The ergonomic design and powered features are designed to enable a single caregiver to provide care during routine handling activities such as transfers and toileting. The SARA Lite features powered opening and closing of the chassis, dual controls, low-friction castors with rear brakes, and an emergency stop and system failure override. It also h
Sara Plus
The SARA Plus is a powered transfer lift and gait trainer designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. The ergonomic design and powered features are designed to enable a single caregiver to provide care during routine handling activities such as transfers and toileting. The SARA Plus lift features powered opening and closing of the chassis, dual controls, low-friction castors with rear brakes, and an emergency stop and sys
Sara Stedy
The Sara Stedy is a transfer aid or standing designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. This mechanical device is used to move a person short distances, such as to and from the toilet, or to assist a person to stand. From a sitting position, the user can grasp the crossbar at the top of the frame and pull up to a standing position. To use the Sara Stedy to transfer the user, the caregiver then flips down the seat, and th
School Smart Youth Backpack with Pocket and Hidden Zipper, 14.5 X 9.8 X 6 in, Vinyl, Clear
Sciatic Nerve Pain Relief Knee Pillow
The Sciatic Nerve Pain Relief Knee Pillow is an orthopedic foam wedge pillow designed for users with lower back pain, arthritis, headaches/migraines, post-knee replacement surgery, injuries, bursitis, sciatica, or postural problems. It is designed to ease back, leg, knee, ankle and hip joint pain by providing proper spinal alignment and reducing pressure while sleeping. The user inserts the bolster between your knees and sleep on the side most comfortable. The pillow is designed to improve circu
Security Pole
The Security Pole is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Secu
Security Pole & Curve Grab Bar
The Security Pole and Curve Grab Bar is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are
Shower Aide Chair
The Shower Aide is a transfer aid designed for use by individuals with balance disabilities when bathing to provide protection from falls and resulting injuries. The chair allows the bather to sit on the seat outside of the tub or shower, fold down the arms and swivel the chair to slide into the tub or shower and lock the seat in position. When the shower is completed, the user lifts the locking lever, swivels the chair back to the outside of the tub/shower, where the unit again locks into posit
Sit-to-Stand Padded Sling Nylon
The Sit-to-Stand Padded Sling Nylon is a transfer sling designed for use by individuals with mobility and balance disabilities. The sling is intended to comfortably and securely support an individual during lift and transfer procedures with a floor-style patient lift. The sling is made from durable material, which resists deterioration from exposure to moisture and laundering.
Sliding Board (Models H70405-0000 & F70405-0001)
The Sliding Board is a transfer aid for use between a wheelchair and a bed, commode, toilet, chair, etc. The board is available in two models: hardwood and plastic. The hardwood board (model H70405) is made of 1/2-inch thick nominal hardwood with end cutouts to facilitate gripping. The plastic board (model F70405-0001) is molded of high-impact plastic with ribs for maximum beam strength. DIMENSIONS: Hardwood model is 8 x 30 inches; plastic model is 8 x 27 inches. WEIGHT: Hardwood board weighs le
Sliding Board Modification.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Strap is added to a wood transfer board to aid in lifting and positioning it. Using a standard wood transfer board with beveled ends, drill, sand and varnish two slots 1/1/2 by 1/2 inch. The slots are 16 inches and 12 inches from one end of the board and 12 inches and 8 inches from the other end of the board. Loop 16 inches of 1 inch wide Dacron web strap through the slots and sew end to end to form a loop. Loop should be large enough to put hand throu
Sliding Board.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Used to bridge space between two surfaces so the person can move or be moved from one surface to the other by sliding in a seated position. Directions and diagram for making a beveled wooden sliding board. similar to commercially available transfer board. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 46. 1976.
Smart-Rail
The Smart-Rail is a transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel rail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. The unit locks in place at the bedside and lifting it to unlock it allows it to swing out to assist in standing. Models are available for standard and hospital beds. OPTIONS: Leg extenders. DIMEN
Smithcot
The Smithcot is a flexible canvas sling that can be used for moving persons with mobility, walking or lower extremity disabilities or seniors, or as an emergency evacuation carrier. The Smithcot is designed to hold an individual comfortably but securely around tight corners or down stairways. It is made of a single square of #8 100% cotton duck cloth, and it has four grip handles, one a at each corner. The Smithcot is not for use with people who have suspected back or neck injuries. DIMENSIONS (
Soft Surface Transfer Board (Models Tb-23Sst & Tb-28Sst)
The Soft Surface Transfer Board is a transfer board designed for use by individuals who use wheelchairs. This board is designed to assist with transfers from a wheelchair to a softer surface such as a bed or lift chair. The pear shape of this board minimizes sinking into a soft surface when transferring, creating a more level transfer. The wide end of the board distributes the users weight over a broader area relulting in a transfer with little or no incline or decline. OPTIONS: Available with o
Soft Transfer Belt (Models 527S & 527)
The Soft Transfer Belt, models 527S and 527, is a standing transfer aid designed for use by caregivers when aiding transfers by individuals with balance, mobility, lower extremity, or walking disabilities. The soft, fully padded belt is slip resistant. It closes with a buckle at the front and the fastening can be adjusted for size. The belt is recommended for use with women who have a large bust or people whose body shape requires a narrower belt fastening. The belt has four large padded vertica
Southpaw Xl Adult Changing Tables
The Southpaw XL Changing Tables are designed for use by caregivers, therapists or family members who experience the back strain and pain that accompanies lifting and transferring clients. The table is powered by an electric motor that lowers the frame 18 inches from the floor (sloping the feet towards the ground), enabling the client to self transfer or use minimal assistance. The safety rails are then locked in the upright position and the frame is then raised to a maximum 37 inches high. This
Splash! Mariner Lift & Splash! Hd
The Splash! Mariner Lift is a boat lift designed for use by individuals with mobility disabilities or spinal cord injury. It provides access to watercraft using a universal sling assembly with an a mechanical actuator, and is made with corrosion proof materials. The Splash! HD is a heavy-duty version of the Splash! with the same features and a larger lifting capacity. POWER: Uses a 24-volt rechargeable battery. CAPACITY: 300 pounds for the standard model and 375 pounds for heavy-duty version. WA
Standard Power Toilet Aid
The Standard Power Toilet Aid is an elevated toilet seat and lift combination designed for use by individuals with lower extremity and mobility disabilities. The device can be installed and removed from most standard and institutional toilets. It consists of a steel frame with arm rests, a padded backrest and an electric lift that lifts the toilet seat (not included) 13 inches above the toilet. A single button controls up and down movement. The unit collapses for transport. DIMENSIONS (HxW): 39.
Stander Curve Grab Bar
The Curve Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis. This grab bar is made of rust-resistant zinc-plated steel. It has two major components, a vertical, curving ladder-like shape that provides four gripping heights and pivots 180 degrees, and a horizontal grab bar that extends from the bottom of the curved part. The swiveling bar locks in place at 0, 90, and 180 degrees. DIMENSIONS: The total height when insta
Standers Car Swivel Cushion
The Standers Car Swivel Cushion is designed to benefit the elderly and persons with a mild to severe disability or condition which prevents that individual from getting in and/or out of the car safely. This product is intended to reduce pain on the back, hips and knees when exiting and entering a vehicle. Rotates 360 degrees. No tools, batteries or assembly required. Soft, quilted padding. Portable. Due to the hygiene or rehabilitation nature of this product, it is non-returnable.
Stedy
The Stedy is a transfer aid or standing designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. This mechanical device is used to move a person short distances, such as to and from the toilet, or to assist a person to stand. From a sitting position, the user can grasp the crossbar at the top of the frame and pull up to a standing position. To use the Stedy to transfer the user, the caregiver then flips down the seat, and the user sit
Stretch Out Strap
The Stretch Out Strap is an exercise band designed for use by individuals with arthritis, mobility disaabilities, neurological disabilities, and other physical disabilities. This exercise strap is double stitched in a series of loops for the hands and feet to enable the user to stretch independently and progressively. The device can also serve as a rope ladder or a leg lifter. The Strap is available alone or with an exercise videotape demonstrating 28 stretches for different areas of the body.
Stretcher Sling
The Stretcher Sling is a transfer lift sling designed for horizontal transfers of people with mobility disabilities in pool, bathtub, and therapy areas. This sling is fully supported by a stainless steel frame from which the mesh fabric can be removed for washing. Two pairs of mesh straps with multiple loops are attached to the frame. The sling is available in a standard model or it can be customized for use in irregular spaces.
Sunnyfield Lift
Sling lifting aid. Sling seat is placed under person in sitting position with safety straps around chest. Requires two attendants to lift. Attendants grasp web handles on each side of shoulders and thighs to transfer person. Polyester fabric. Can be used in most lying and sitting situations. Standard dimensions unfolded 17 inches by 39 inches. Options: commode style seat, washable incontinent pad, and sitting wedge. Sizes: S,M, L, custom sizes available.
Super Grip Suction Handle
The Super Grip Suction Handle is a bathroom bar designed to help users get in or out of the shower or tub. The bathtub bars are made of steel, are white, and enamel-coated. The crank-looking device attaches to the tub wall in order to help persons with mobility issues get in/out of the bathtub. This product has rubber pads to prevent damage to the tub walls.
Superpole & Superpole Bariatric
The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a
Superpole F.r.s.
SuperPole F.R.S. is a vertical pole transfer aid designed for use by individuals with balance, mobility, or walking disabilities. The unit is a portable steel pole that provides standing and transferring support in institutional (concrete floor) applications. This is a compact alternative to the SuperPole (see entry) floor to ceiling pole system that eliminates the need for ceiling attachment. The SuperPole FRS is placed into the installed floor receptacle and secured into the receptacle by turn
Superpole Traveler
The SuperPole Traveler is a portable transfer aid designed for use by individuals with balance, walking, or mobility disabilities. Central to the system is a floor-to-ceiling vertical steel grab bar, which provides a secure structure that can be installed in minutes between a floor and ceiling. The unit installs by turning the jackscrew at the bottom of the pole. The screw expands the pole to create enough tension between the floor and ceiling to hold the pole secure. Rubber pads on the ceiling
Supertrapeze
The SuperTrapeze is a support bar designed for use with Healthcraft's SuperPole. The add-on allows a user to pull themselves in an upright position out of bed or off a couch. The two offset ladder rungs help to improve arm strength and increase back comfort. The device can be stowed when not in use.
Surehands 2000 Series Track-To-Track System
The SureHands 2000 Series Track-to-Track System is a transfer lift designed for use by individuals with mobility, severe physical, or neurological disabilities or spinal cord injury. This compact mobile lift can be moved from place to place and used wherever ceiling track has been installed. Its low height makes it appropriate for locations with low ceilings or mobile home interiors or for lifting onto high beds or high mat and changing tables. It has anergonomically designed carrying handle and
Surehands 5001 Mobile Lifter
The SureHands 5100 Mobile Lifter is a powered transfer lift designed for use by individuals with mobility, severe physical, or neurological disabilities or spinal cord injury. This lifter has a long boom arm and tall mast, providing a large lifting range with room for a caregiver or personal assistant to maneuver in and around the boom arm and base. The lifter is constructed from aluminum alloy. In addition to lifting, it can also be used to ambulate many adults with body support or a walking ha
Surehands 5002 Mobile Lifter With Integrated Weighing Scale
The SureHands 5002 Mobile Lifter with Integrated Weighing Scale is a powered transfer lift designed for use by individuals with mobility, severe physical, or neurological disabilities or spinal cord injury. This mobile lift allows users to be lifted and weighed in a one-step process. The scale is located on the control box. The lift is constructed of aluminum and has an adjustable base to allow use in narrow hallways or in transfers from wide wheelchairs. The unit has a lifting range from floor
Surgilift
Stretcher with lifting mechanism. Special sheets with six attached straps are placed under person to be lifted. Straps are buckled to frame of Surgilift and frame is lifted to desired height. U shaped base, 4 casters with locks.
Swivel Cushion
The Swivel Cushion is a car transfer aid designed for use by individuals with arthritis or mobility disabilities. The two-piece, low-profile cushion has a soft top that rotates smoothly on a flat center disk. The nonskid bottom conforms to the shape of the seat and keeps the unit in place. DIMENSIONS: 16 inches in diameter. CAPACITY: 350 pounds.
Swivel Cushion (Model Ha-4781)
The Swivel Cushion, model HA-4781, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or arthritis. This cushion helps the user to turn when getting in or out of a car, wheelchair, or bed. It has a washable soft fleece top cover. DIMENSIONS: 405 millimeters in diameter x 55 millimeters high. WEIGHT: 1.5 kilograms.
Swivel Seat
The Swivel Seat is a transfer aid designed for use by individuals with mobility and lower extremity disabilities. This cushioned disc secures to automobile seats and chairs with the attached strap. DIMENSIONS: 15.5 inches in diameter and 2.75 inches high.
Tenor
The Tenor is a mobile lift designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. This mobile bariatric lift has a lightweight aluminium structure with extra room for the larger user, including a four point spreader bar with widely spaced shoulder attachment points. The lift has an extended boom that allows users to be repositioned through 360 degrees if required for access to a bed or chair. The lift includes a range bariatric slings to
Theraslide Transfer Boards
Theraslide Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are constructed from defect-free birch plywood and machined from 7-ply base board with 3 additional plies form-laminated over this surface from end to end, producing a smooth, uninterrupted surface. All edges are computer routed and the surface is machine- and hand-sanded and finished with multiple coats of semi-gloss lacquer/sealer. Models include the plain board, board with telescope and
Three-Piece Quick Sling
The Three-piece Quick Sling is a transfer lift sling designed for use by individuals with mobility disabilities. Made of polyester/aerotex webbing, this sling offers quick application and easy access for unfastening clothes. One strap fits around the back and under the user's arms, while separate straps pass under each leg.
Tidis-B: Wheelchair-To-Bed Transfer System
Tidis-B (Transport of Individuals with Disabilities into Bed) is an assistive device designed to move a person from a wheelchair to a conventional bed, as well as from a conventional bed to a wheelchair. The device is intended for use in homes and is able to transport a person who weights up to 300 lbs. In addition, the device requires minimal physical assistance by caretakers, which can help prevent back injuries. The device is designed so that the person being transported is comfortable and sa
Titan 500
The Titan 500 Patient Lift System is a freestanding, powered transfer lift designed to assist in transferring people who have mobility, lower extremity and severe physical disabilities. This lift enables a caregiver to safely lift and transfer a person along an overhead track to a bed, wheelchair, chair, bath or commode. The lift track is made of a 60/61 grade satin anodized aluminum for lightweight strength and durability; however, the Titan 500 is heavy enough to be stable if hit by a moving w
Tlc Turn-And-Lift Pad (Model 557001)
The TLC Turn-and-Lift Pad is a transfer aid designed to assist caregivers in turning and positioning individuals with physical disabilities in bed. This pad has a brushed tricot top layer, a middle layer of absorbent foam, and a bottom layer of urine-proof vinyl. Attached loops aid in turning and positioning. DIMENSIONS: 40 x 40 inches
Toilet Access Platform And Rail
CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation of a toilet access platform and rail for a child with Multicystic Leukoencephalopathy and poor motor skills. The frame was made from round steel tube painted white, the frame goes right over the toilet to support a plywood backrest and side rails which the child uses both to access the toilet and keep his balance on the seat. There is also a wide plywood platform in front of the toilet with non-slip strips attached. All the timber is fin
Toilet Bench.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Over the toilet bench the height of a wheelchair seat with an opening in one side to allow a person to slide from the wheelchair and use the toilet. Wooden bench about 3 feet long and as high as a wheelchair seat, with an opening at one end to be positioned above the toilet. Includes photograph. COMMENTS: Submitted by the Institute of Physical Medicine and Rehabilitation, Bellevue Medical Center, New York University. SKILLS REQUIRED: Woodworking. TITLE
Toilet Transfer Aid
DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide a means for those with weak muscles a means of independently getting on and off the toilet. Two one-inch eyehooks are attached to the bathroom ceiling about 16 inches apart and 8 inches in front of the toilet. A length of quarter-inch nylon rope is braided through the hooks, then threaded through 5/16-inch holes in two 1.75-inch wooden dowels, each 18 inches long. The top dowel is placed at the user’s shoulder level and the lower one 8 inches below. B
Tonya Lift
The Tonya Lift is a powered transfer lift designed and sized specifically for use with children with mobility disabilities. This lift adapts to a variety of transfer needs, from bed and floor to bath, commode, wheelchair, and more. The electronic patient positioner adjusts the user to a range of positions from fully lying down to sitting. Standard features include an elephant trunk-style boom with unobstructed 360-degree pivoting at maximum lifting height and a U-shaped base with four heavy-duty
Topsheet (Models 1519 & 1520)
TopSheet, models 1519 and 1520, is a bed turning aid, incontinent pad, and decubitis pad designed for use by individuals with mobility disabilities or incontinence. The top side (model 1520) is made of super-absorbent material, and the underside (model 1519) consists of a polyurethane-coated moisture-repellant membrane. The surface that the patient lies on is soft, brushed polyester. The surface always feels dry to lie on, which helps prevent pressure sores. Strong straps for fastening to a ceil
Trans-Sit Toilet Transfer Board
The Trans-sit Toilet Transfer Board is a toilet transfer board designed for use by individuals wh use wheelchairs. This transfer aid is designed to attach to the toilet and bridge to the wheelchair to offer a safe method of transfering on and off the toilet. Made of high- density polyethylene plastic for ease of cleaning, the Trans-sit board secures to the rim of the toilet with rim stops (one on the inside of the toilet and one on the outside of the toilet). This feature prevents the shifting
Transactive
The Transactive is an overhead transfer lift designed for use with individuals with mobility disabilities. This permanently installed lift is used in conjunction with the included powder-coated aluminum overhead track. Standard features whisper quiet operation, soft start and stops, an eight foot vertical reach, an over-speed safety governor, a push-button emergency lowering system, built-in safety stops, and a pneumatic non-electric hand control designed for use in wet or humid environments. T
Transborder
The Transborder is a standing transfer aid designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The device is a rotating pole that can be used to transfer from one seated position to another (eg., from one wheelchair to another). The user first turns and locks the direction handle, then puts his/her knees and feet in place, grasps the direction handle and stands slighty using arm strength, and then rotates to the selected point. OPT
Transfer Belt
The Transfer Belt is a gait belt designed for use with individuals with mobility disabilities. This belt enables a therapist or caregiver to provide light to moderate assistance during walking, sitting, or transferring. This belt features hook-and-loop closure and two webbing handholds. DIMENSIONS: Models are available to fit 28 to 42 inch waists, 32 to 48 inch waists, and 36 to 54 inch waists.
Transfer Belt (Model Ha-4710)
The Transfer Belt, model HA-4710, is a transfer aid designed for use by individuals with mobility disabilities or spinal cord injury. It is designed to help an assistant lift the user from a bed, chair, or wheelchair, or support the user in short-distance transfers. The belt has four webbed handle grips for safety when transferring. DIMENSIONS (LxW): The belt is 740 x 140 millimeters. Its strap is 740 millimeters long. WEIGHT: 205 grams.
Transfer Belt (Models 655701 & 655702)
The Transfer Belt is a transfer aid designed to assist therapists and caregivers in transferring individuals with mobility disabilities from a chair to a bed or from a bed to a chair. The belt also provides leverage during assisted walking and standing. The belt is made of heavy-duty cotton webbing and a secure metal buckle to close it around the waist. DIMENSIONS (LxW): Model 655701 is 54 x 2 inches long and model 655702 is 72 x 2 inches long.
Transfer Board (Model 765)
The Transfer Board, model 765, is designed to aid a person with lower extremity or mobility disabilities or spinal cord injury to transfer from a wheelchair or chair to a commode or bed and back. It has gradually tapered ends and is constructed of hardwood and has a smooth, natural finish. DIMENSIONS (WxLxT): 8 x 30 x 0.75 inches.
Transfer Board (Model 765H)
The Transfer Board, model 765H, is designed to aid a person with lower extremity or mobility disabilities or spinal cord injury to transfer from a wheelchair or chair to a commode or bed and back. It features hand slots with tapered ends, and it is constructed of 14 ply hardwood with a smooth, natural finish. DIMENSIONS (WxLxD): 8 x 30 x 0.75 inches; hand slots 19 inches apart.
Transfer Boards
Transfer board made of solid red oak electronically glued for strength and crack resistance. Finished boards are coated with urethane sealer and polished. Unfinished boards are sanded smooth and are ready to finish. Boards are 8 inches wide, available without hand hole, with one hand hole or with 2 hand holes, and in 24 or 30 inch lengths.
Transfer Commode Seat.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adapted transfer seat on a commercially available commode chair with swing away arms. Allows person to transfer more easily between a wheelchair or bed and the commode chair. The standard seat is removed from a commode chair and a wooden seat is made from 3/4 inch plywood. One side of the seat is extended like a transfer board with a slot near the far end to hook onto the wheelchair frame. Includes pictures. SKILLS REQUIRED: Woodworking. AUTHOR: Eileen
Transfer Disc
The Transfer Disc is a standing transfer aid designed to assist caregivers in transfering individuals. The disc rotates on a graphite pad. The thin profile allows a transfer with minimal movement. DIMENSIONS: The disc has a diameter of 15 inches.
Transfer Handle, The (Models 2001, 2025, & 2025H)
The Transfer Handles are transfer aid designed to assist people with mobility disabilities in transferring to and from a bed and to assist with in-bed mobility. Model 2025 features a steel handle attached to a bed board which slides between the mattress and the box springs. Shaped in an inverted U, the handle also has a second, lower bar for added stability in standing and greater in-bed mobility. Model 2025H is similar to model 2025, but is designed specifically for use with hospital-style beds
Transfer Hoist
The Transfer Hoist is a powered seat transfer lift designed to enable a person with a disability to transfer independently from a wheelchair to a bed. The device consists of a steel crane which swivels around from behind a bed. The crane includes an electric winch, a remote switch, and a harness. The crane has mounting points on the floor and the ceiling. The user fits into the sling-type harness, then operates the winch to be lifted and transferred. PROTOTYPE DEVELOPMENT: Designed by Frank Hemi
Transfer Lift Sling (Models 112, 113, 114, & 115)
One piece sling, with or without commode opening. Canvas, polydura nylon or dacron open mesh. No head support.
Transfer Lift Stretcher (Model Str)
Frame stretcher, 74 inches long by 26 inches wide, includes canvas sling with zippers. Four web lifting slings. Stainless steel frame. Maximum load, 400 pounds.
Transfer Sling
The Transfer Sling is a transfer aid designed to enable a caregiver or therapist to safely assist individuals with mobility disabilities in transferring and standing. This device combines a transfer belt with a sling, providing support around the back and behind the knees. Handles enable the caregiver to lift without strain. SIZES: Small/medium or large. CAPACITY: 250 pounds.
Transfer Sling And Gait Belt
The Transfer Sling and Gait Belt is a combination manual transfer sling and gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This belt-style device provides support under the knees and behind the back, aiding in better body mechanics during one- and two-person assisted transfers. SIZES: Small/medium or medium/large. CAPACITY: 250 pounds.
Transfer Trapeze
The Transfer Trapeze is a powered transfer aid designed to allow the user to transfer from a wheelchair to a couch with the aid of an overhead trapeze. The motorized trapeze is suspended from a wheelchair-mounted frame. The frame consists of steel tubing and 1-inch electrical conduit tubing. The motor consists of a used car window motor, which is mounted underneath the seat of the wheelchair. The user grasps the trapeze and activates the mounted switch, which rotates the device 90 degrees and tr
Transfer Turntable (Model Ha-4770)
The Transfer Turntable, model HA-4770, is a turning and transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This strong, lightweight turntable rotates 360 degrees in any direction, enabling a helper to transfer the user safely from chair to bed or car to wheelchair. DIMENSIONS: 405 millimeters in diameter. CAPACITY: 125 kilograms. WEIGHT: 1 kilogram.
Transferring Wheelchair
---- PROTOTYPE --------- PURPOSE: To design a biomedical device to assist with the transfer of an individual with mobility disabilities from a wheelchair to a stationary object such as a bed. The prototype is based on a basic wheelchair design; and includes features that will aid with the transfer process. These features include: 1) reclining seatback of chair; 2) extra supports for stability in the reclined position; and 3) sliding seat and seatback to facilitate moving from chair to object. T
Transportable
The Transportable is a portable powered transfer lift designed for use with individuals with mobility disabilities. This lift can be used with any overhead ceiling track and track is included. Standard features whisper quiet operation, soft start and stops, an eight foot vertical reach, an over-speed safety governor, a push-button emergency lowering system, built-in safety stops, and a pneumatic non-electric hand control designed for use in wet or humid environments. The lifthook has a non-remov
Travel Lifter
The Travel Lifter is a mechanical transfer lift designed to assist in transfers from wheelchair to bed or shower for individuals with mobility disabilities or spinal cord injury who need total lift assistance. Designed to work with most types of wheelchairs, this lift is lightweight and compact for use while traveling. The person to be transferred leans forward against a padded support. Lifting is accomplished with a thigh strap below the buttocks, allowing clothing removal for easy toileting,
Trendable
The Trendable is a product designed for those individuals ages three and up to apply pressure to themselves. Engages the body in two ways – the vibration and the muscles needed to squeeze and trigger the vibration. Automatically shuts off when pressure is reduced. Comforting sleep accessory. There is a sound that could be distracting to others. Made for hugging, not for sitting on.
Tubbuddy With Tilt (Model Sb2T)
The TubBuddy with Tilt, model SB2T, is a caster shower commode designed for use by individuals with lower extremity, mobility or severe physical disabilities or spinal cord injury. This system allows a caregiver to transfer an individual over the edge of a bathtub for ease in showering or to be rolled over a standard or elongated toilet when used as a commode. For transfer into or out of a shower enclosure, see the ShowerBuddy (see separate entry). The chair can also be used a shower chair for r
Turning Cushion (Model Ha-4780)
The Turning Cushion, model HA-4780, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or arthritis. This foam-padded cushion swivels 360 degrees in any direction to help the user in rising from a seated position. The cushion can be used in a vehicle or on a chair. Its removable cover is water washable. DIMENSIONS: 390 millimeters in diameter. WEIGHT: 1 kilogram. COLOR: Gray.
Turnsheet (Model 1580)
The Turnsheet, model 1580, is a transfer aid designed to assist individuals with mobility disabilities in turning or changing positions in bed. The Turnsheet consists of two elements: the first element is quilted mat with a woven cotton top layer, a layer of flame-retardant trevira padding, and a bottom layer of ultra-low friction woven nylon. This element is equipped with webbing straps to be attached to the head of the bed frame. The second element is a mattress cover with an ultra-low frictio
Turntable (Model 5085)
The TurnTable, model 5085, is a standing transfer aid designed for use by individuals with mobility disabilities. It is used to enable transfers to and from wheelchairs, beds, and toilets by individuals who have enough strength to stand on their legs but not enough energy to move their feet. It is made of durable polyethylene with a rubber-like anti-slip surface. Two discs are attached in the center with a metal screw, enabling the top disc to rotate and pivot the user to the proper position for
Two Piece Sling
Two piece sling, wide seat and back sections. Available in canvas, nylon or dacron open mesh. Seat with commode opening available.
Two Piece Sling (Models 9001 & 9001A)
Two piece sling, wide seat and back sections. Chains and bars included. Headrest available. Available with commode opening.
Two-Piece Quick Sling
The Two-piece Quick Sling is a transfer lift sling designed for use by individuals with mobility disabilities. Made of polyester/aerotex webbing, this minimally restrictive sling offers quick application and easy access for unfastening clothes. One strap fits around the back and under the user's arms, while a second strap passes under both legs. A variety of strap loops accommodate a variety of sizes and positions.
Ultra Sling
The Ultra Sling is a bariatric transfer lift sling designed for use by large individuals with spinal cord injury or mobility, lower extremity, or severe physical disabilities. This sling is made of polyester with reinforced legs. SIZES: Short, medium, and long. CAPACITY: 400 pounds.
Ultra Twin Freespan
The Ultra Twin Freespan Traverse is a powered overhead bariatric transfer lift designed for use by obese individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This freestanding rail system is specially designed to lift heavy patients in combination
with the Likorall or Multirall (see separate entries)lift motor. This unit is adjustable to four different heights, and is available in eight different rail lengths. Equipped with locking han
Ultraslick Transfer Board
Transfer board to aid in transferring from wheelchair to bed or chair or toilet. Fiberglass laminated with hardwood. Lengths: 18, 24, or 30 inches. Available with or without hand holes on each end.
Ultratwin Freespan Traverse
The UltraTwin FreeSpan Traverse is an overhead powered bariatric transfer lift designed for use by obese individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This traverse system consists of a movable traverse rail mounted on two fixed rails. The ceiling-mounted traverse system makes the entire area of a room accessible for lifting and transfer. Traverse rails can be connected via switches, enabling, for example, transfers between different rooms. Th
Unbreakable Cupholder Vertical Mount
The Unbreakable Cupholder Vertical Mount is designed for those individuals with lower extremity and neurological disabilities to help them by keeping their drinks more accessible. Securely attaches to vertical tubing on bedrails, wheelchairs, walkers, rollators. Durable fabric will not break.
Uneek Bedrail System
The Uneek Bedrail System is a side rail and transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel bedrail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. This portable bedrail system is available in two models. One opens and closes like a gate, and the other one does not. Both models feature a utility board that can supp
Universal Head Support Sling (Model Uss-K)
The Universal Sling, model USS, is a transfer lift sling designed for use with individuals with mobility disabilities. This open-bottom sling may be used for lifting, transporting, bathing, and toileting. Standard features include an extension to support the head and neck, a separate support strap for each leg, and four-point lift attachment. The machine-washable sling is offered in a choiice of four materials: polyester webbing, nylon, nylon with internal reinforcement, and polyester/aerotex w
Universal Sling
The Universal Sling is a transfer lift sling designed for use with individuals with mobility disabilities. Available in nylon mesh or quilted, polyester padded material, this launderable quick-drying sling permits transfer in a variety of seated positions and provides back and thigh support with access for toileting. This sling is equipped with leg, hip, and shoulder straps with loops for various sitting positions. OPTIONS: Additional head and neck support is available.
Universal Sling (Model Uss)
The Universal Sling, model USS, is a transfer lift sling designed for use with individuals with mobility disabilities. This open-bottom sling may be used for lifting, transporting, bathing, and toileting and features four-point lift attachment and a separate support strap for each leg. The machine-washable sling is offered in a choiice of four materials: polyester webbing, nylon, nylon with internal reinforcement, and polyester/aerotex webbing with polyester on one side and aerotex webbing on t
V4I
The V4i is an overhead transfer lift designed for use with individuals with balance disabilities, brain injury, cognitive disabilities, lower extremity disabilities, mobility disabilities, severe physical disabilities and spinal cord injury. The V4i is a lift system for moving individuals along a high strength track system (not included) that installs into any ceiling. It can move in two or four directions, and it has a steel frame and fire retardent plastic cover. It fits a variety of slings, s
Vector Gait & Safety System
Vector Gait & Safety System is designed for individuals recovering from stroke, amputations, orthopedic injuries and spinal cord injuries. Patient falls are the number one risk during the rehabilitation process and contribute to a loss of confidence, anxiety, activity restriction and injury. The Vector Gait and Safety System® helps to promote patient mobility and independence while reducing the risk of injury to both patients and therapists. Leveraging dynamic body weight support (DBWS),
Voyager Series (Models 420, 550, & 800) & Voyager Portable
The Voyager Series and the Voyager Portable are overhead transfer lift systems designed for use with individuals with balance disabilities, brain injury, cognitive disabilities, lower extremity disabilities, mobility disabilities, severe physical disabilities and spinal cord injury. The Voyager Series offers permanent and semi-permanent ceiling tracks with a lift system for moving individuals. The high strength track system installs into any ceiling. Features include a soft start and stop, two-s
Voyager Spa Lift
The Voyager Spa Lift is a powered lift designed for use by individuals with mobility disabilities or spinal cord injury. This lift is designed for use by passengers who need a lift to safely enter and exit spa facilities aboard ship and it can be operated by either the user or an attendant. The lift is made of corrosion-proof materials and it comes with a waterproof hand control and handheld fresh water rinse. OPTIONS: The lift can be configured to adapt to a ship's specific spa design. POWER: U
Walking Sling
The Walking Sling is a transfer lift sling designed to lift individuals with mobility disabilities from a seated to a standing position. This sling features six straps, two of which wrap around the legs, equipped with a variety of loops to accommodate a variety of postures. The sling offers upper body support and it provides freedom of movement to enable it to be used with individuals using parallel bars during rehabilitiation.
Webbed Transfer Aid
"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals to be lifted and transferred from one seat or surface to another in a seated position. To make this device, cut one 72-inch strip of webbing (lengthening may be required for use with a larger person) and then cut eight eight- to nine-inch strips (lengthening may be required for use with a larger person). Assemble straps in a crosshatch pattern. Zig Zag stitch along end of all the straps to avoid fraying. Straight stitch all seams about on
Wheelchair Training Stools (Model 710)
The Wheelchair Training Stools, model 710, are transfer training devices designed for teaching patients to get in and out of wheelchairs without assistance. As the patient becomes more skilled, the steps may gradually be removed. The steps can be hooked together securely in any sequence. DIMENSIONS: Top size is 20 x 10.75 inches, height of stools are 20, 16, 12, 8 and 4 inches. CAPACITY: 250 pounds.
Wheelhold Board (Model 31569)
The Wheelhold Board, Model 31569, is a transfer board designed for use by people who use wheelchairs. This lacquered, 7-ply Finnish birch plywood board is designed to fit around the wheel of a wheelchair when the armrest is removed and is equipped with a tongue that fits between the seat and the wheel to secure the board during transfers. The board has a wide surface to assist with balance. DIMENSIONS (LxW): 28 x 11.75 inches. COLOR: Walnut stain. WARRANTY: The manufacturer warrants this product
Wooden Monkey Balance Board
The Wooden Monkey Balance Board is a sensory integration product designed for children ages three and up with balance disabilities to help them learn how to balance, build leg strength and promote coordination. Some adult assembly required.
X-Fer Rail Portable Transfer Rail
The X-Fer Rail Portable Transfer Rail is a transfer board for designed for caregivers to use with individuals with mobility difficulties. Enables safe transfers to and from a wheelchair. Quickly folds and unfolds. Conveniently fits in a backpack, wheelchair bag, carry-on or briefcase (not included). Portability of the board promotes use outside of the home which will help to reduce shoulder strain associated with independent transfers. Open seating design reduces the risk of friction based skin